Sony DSC-H2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Filmkameras Sony DSC-H2 herunter. Sony DSC-H2 User manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
2-673-174-11(1) DSC-H2/H5
2-673-174-11 (1)© 2006 Sony Corporation Printed in Japan
Printed on 100% recycled paper using VOC
(Volatile Organic Compound)-free vegetable
oil based ink.
continued on the reverse
Using batteries other than the supplied ones
You can use HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries/LR6 (size AA) alkaline
battery/ZR6 (size AA) Oxy Nickel Primary Battery. t “User’s Guide/Troubleshooting”
(page 110)
Using the AC Adaptor
You can connect the camera to a wall outlet (wall socket) using the AC-LS5K AC Adaptor (not
supplied). t “User’s Guide/Troubleshooting” (page 19). Refer to the operating instructions
supplied with the AC Adaptor.
To check the remaining battery level
Press POWER to turn on and check the level on the screen.
• The displayed time remaining may not be correct under certain circumstances.
• When using LR6 (size AA) alkaline battery/Oxy Nickel Primary Battery, the battery remaining indicator
does not display the correct information.
• When the AC Adaptor (not supplied) is used, the battery remaining indicator is not displayed.
To remove the batteries
Hold the camera with the battery cover facing upward, then open the battery cover and remove
the batteries. Be careful not to drop the batteries.
To use your camera abroad — Power sources
You can use your camera, the supplied battery charger, and the AC-LS5K AC Adaptor (not
supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60
Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of
the wall outlet (wall socket) [b].
Battery
remaining
indicator
Battery
remaining
guidelines
Sufficient
power
remaining
Battery half full Battery low,
recording/
playback will
stop soon.
Change the batteries with
fully charged ones, or
charge the batteries. (The
warning indicator flashes.)
Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
Turn the camera on/set the clock
2
2
1 Select . 2 Press the POWER button.
Lighting
3 Set the clock with the control
button.
1 Select the date display format with v/V, then press
z.
2 Select each item with b/B and set the numeric value
with v/V, then press z.
3 Select [OK] with B, then press z.
• To cancel, select [Cancel] and press z.
To change the date and time
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.
t “User’s Guide/Troubleshooting” (pages 56 and 68)
On the clock display
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.
When turning on the power
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
• Do not touch the lens portion as the lens portion extends. Also, do not leave the camera with the lens portion
extended for a long period of time with the power off as this may cause malfunction.
• The following screen appears when the camera is turned on for the second time or afterwards.
To turn off the power
Press the POWER button again.
• If the camera is running on battery power and you do not operate the camera for about three minutes, the
camera turns off automatically to prevent wearing down the batteries (Auto power-off function).
Changing the language setting
You can change the screen display to show messages in a specified language. To change the
language setting, press MENU to display the menu screen. Select (Setup) with the control
button, then, select [ Language] in (Setup1), and select the desired language. t “User’s
Guide/Troubleshooting” (page 65)
A
1
Insert a “Memory Stick Duo” (not
supplied)
Select the image size for use
When there is no “Memory Stick Duo” inserted
The camera records/plays back images using the internal memory (30 MB). t User’s Guide/
Troubleshooting” (page 29)
3
3
Insert the “Memory Stick Duo”
all the way in until it clicks.
Terminal side
Labeled side
Open the “Memory
Stick Duo” cover.
Close the cover.
4
4
button
1 Select a mode.
Select .
Select .
Still image:
Movie:
2 Press (Image Size).
3 Select the size with v / V.
• The screen above is for still images.
• For movies, select [640(Fine)] (“Memory Stick PRO
Duo” only), [640(Standard)] or [160].
4 Press (Image Size) to
complete the setting.
On still image sizes
For details on the image size t “User’s Guide/Troubleshooting” (page 16)
The default settings are marked with .
1)
Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.
2)
Both edges of the image may be cut off when printing t “User’s Guide/Troubleshooting” (page 102)
3)
By using a Memory Stick slot or USB connection, you can enjoy higher quality images.
On the recordable number of still images and recordable time of movies
Recordable number of still images and recordable time of movies vary depending on the image
size selected.
For details on recordable number or time t “User’s Guide/Troubleshooting” (page 28)
• The number of recordable images and time can differ according to shooting conditions.
To remove a “Memory Stick Duo”
Image size Guidelines No. of images Printing
7M (DSC-H5 only) Up to A3/11×17"print Less
More
Fine
Rough
6M (DSC-H2 only) Up to A4/8×10"print
3:2
1)
Match 3:2 Aspect Ratio
5M (DSC-H5 only) Up to A4/8×10"print
3M Up to 13×18cm/5×7"print
2M Up to 10×15cm/4×6"print
VGA For E-mail
16:9
2)
Display On 16:9 HDTV
3)
Still images Movies
“Memory Stick Duo” cover
Open the “Memory Stick Duo” cover, then push the
“Memory Stick Duo” in once.
When the access lamp is lit
Never open the battery cover, remove the “Memory Stick
Duo” or turn off the power. The data may be corrupted.
Maximum number
of recordable
images
Maximum
recordable time
Access lamp
Digital Still Camera
Read This First
DSC-H2/H5
Operating Instructions
Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate
volume) thoroughly, and retain them for future reference.
http://www.sony.net/
Checking the accessories supplied
A “Memory Stick Duo” is not
supplied.
The camera has its own internal
memory (30 MB), however,
purchase of a “Memory Stick
Duo” is recommended for
shooting more images.
“Memory Stick Duo”: you can
use a “Memory Stick Duo
with your camera.
“Memory Stick”: you cannot
use a “Memory Stick” with
your camera.
Other memory cards cannot
be used.
• For details on “Memory Stick
Duo” t
“User’s Guide/
Troubleshooting
(page 108)
• Ni-MH battery charger BC-
CS2A/CS2B (1)/Power cord
(mains lead) (1)
• HR6 (size AA) Nickel-Metal
Hydride batteries (2)/Battery
case (1)
• USB cable (1)
• A/V cable (1)
Shoulder strap (1)
• Lens hood (1)/Adaptor ring (1)
• Lens cap (1)/Lens cap strap (1)
• CD-ROM (Cyber-shot
application software) (1)
• Operating instructions: “Read
This First” (this manual) (1)
• Operating instructions: “User’s
Guide/Troubleshooting” (1)
Notes
• Charge the batteries (supplied) before using the camera for the first time.
• The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the
pixels are operational for effective use. However, there may be some tiny black points and/or bright
points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are
normal in the manufacturing process and do not affect the recording in any way.
• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to
apply force to it. Attach the shoulder strap to prevent the camera from damage by being dropped, etc.
t “User’s Guide/Troubleshooting” (page 20).
• Illustrations used in this manual are of the DSC-H2 unless noted otherwise.
Additional information on this product and answers to frequently asked questions can be
found at our Customer Support Website.
Prepare the batteries
• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the
battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and
remove the Nickel-Metal Hydride batteries from the battery charger.
• Time required to charge fully depleted Nickel-Metal Hydride batteries (supplied) at a temperature of 25°C
(77°F) is approximately 6 hours. Charging may take longer under certain circumstances or conditions.
• The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction.
1
1
Battery charger
2 Connect the power cord
(mains lead).
3 To wall outlet
(wall socket)
Power cord (mains lead)
1 Insert the batteries.
CHARGE lamp
Light on: Charging
Light off: Completed (Remove the batteries.)
Match 3/# and
insert.
4 Insert the charged batteries.
While pressing OPEN,
open the battery cover.
Match 3/# and insert. Close the cover.
Bottom
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Read This First

2-673-174-11(1) DSC-H2/H52-673-174-11 (1)© 2006 Sony Corporation Printed in JapanPrinted on 100% recycled paper using VOC (Volatile Organic Compound

Seite 2 - View/delete images

2-673-174-11(1) DSC-H2/H5Using the zoomPressing the button slightly zooms slowly and pressing the button fully down zooms fast.• When the zoom scale

Kommentare zu diesen Handbüchern

Keine Kommentare