Sony HT-S100F Bedienungsanleitung PDF herunterladen (Seite 26)

26

GB

Troubleshooting

If you experience any of the following

difficulties while using the system, use

this troubleshooting guide to help

remedy the problem before requesting

repairs. Should any problem persist,

consult your nearest Sony dealer.

The system does not power up.

 Check that the AC power cord (mains

lead) is connected securely.

 Disconnect the AC power cord (mains

lead) from the wall outlet (mains),

and then reconnect after several

minutes.

The system is turned off

automatically.

 The auto standby function is working.

Set the auto standby function to off

(page 25).

The system does not turn on even

when the TV is turned on.

 Set the Control for HDMI function to

on (page 24). The TV must support

the Control for HDMI function. For

details, refer to the operating

instructions of your TV.

 Check the speaker settings of the TV.

The system power syncs with the

speaker settings of the TV. For details,

refer to the operating instructions of

your TV.

 If the sound was output from the

speakers of the TV the previous time,

the system does not turn on even

when the TV is turned on.

The system turns off when the TV is

turned off.

 Check the setting of the Control for

HDMI function (page 24). When the

Control for HDMI function is set to on,

the system turns off automatically

when you turn off the TV regardless

of the input.

The system does not turn off even

when the TV is turned off.

 Check the setting of the Control for

HDMI function (page 24). To turn the

system off automatically regardless

of the input when you turn off the TV,

set the Control for HDMI function to

on. The TV must support the Control

for HDMI function. For details, refer to

the operating instructions of your TV.

There is no picture or the picture is

not output correctly.

 Select the appropriate input

(page 16).

 When there is no picture while TV

input is selected, select the TV

channel that you want using the TV

remote control.

 Disconnect the HDMI cable, then

connect it again. Make sure that the

cable is firmly inserted.

No TV sound is output from the

system.

 Check the type and connection of the

HDMI cable or optical digital cable

that is connected to the system and

the TV (refer to the supplied Startup

Guide).

 Disconnect the cables that are

connected between the TV and the

system, then connect them firmly

again. Disconnect the AC power cords

Troubleshooting

Power

Picture

Sound

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare