Sony KLV-26S400A Bedienungsanleitung PDF herunterladen (Seite 31)

Using MENU Functions

KLV-40/37/32/26S400A

3-876-548-11(3)

Manual Programme

Preset

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Colour System”/“Signal

Booster”, press PROG +/- to select the programme number with the channel. You

cannot select a programme number that is set to “Skip” (page 31).

Programme/TV System/VHF or UHF

Presets programme channels manually.

1 Select “Programme”, then press .

2 Press F/f to select the programme number you want to manually tune

(if tuning a VCR, select channel 00), then press RETURN.

3 Press

F/f to select “TV System”, then press .

4 Press F/f to select your TV broadcast systems, then press .

5 Press F/f to go to the frequency range indication (“VHF Low”, “VHF

High” or “UHF”), then press .

6 Tune the channels as follows:

Press G/g to search for the next available channel. When a channel has been found,

the search will stop. To continue searching, press

G/g.

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected channel.

This name will be displayed briefly on the screen when the channel is selected.

To input characters:

1 Press

F/f to select the desired letter or number (“_” for a blank space),

then press

If you input a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct

character.

2 Repeat the procedure in step 1 until the name is completed, then press .

AFT

Allows you to fine-tune the selected programme number manually if you feel that a

slight tuning adjustment will improve the picture quality.

You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the

fine tuning is performed automatically.

Audio Filter

Improves the sound for individual channels in the case of distortion in mono

broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or

intermittent sound muting when watching mono programmes.

If you do not experience any sound distortion, we recommend that you leave this

option set to the factory setting “Off”.

~ • You cannot receive stereo or dual sound when “Low” or “High” is selected.

Skip

Skips unused channels when you press PROG +/- to select channels. (You can still

select a skipped channel using the number buttons.)

Colour System

Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”

or “PAL60”) according to the channel.

Signal Booster (Intelligent Signal Booster)

Improves the picture quality if the TV signal is too strong or weak.

Press

F/f to select either “Off” if the signal is too strong (picture distorted; picture

with lines; signal interference) or “Auto” if the signal is weak (snowy picture), then

press .

Signal Level

Displays the signal level for programme currently being watched.

red amber green

(weak) (average) (good)

010COV.book Page 31 Thursday, June 19, 2008 10:03 AM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony KLV-26S400A Bedienungsanleitung Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für CRT-Fernseher Sony KLV-26S400A