Sony DVP-S735D Bedienungsanleitung PDF herunterladen (Seite 72)

Additional Information

Troubleshooting

Even though you set the aspect ratio in “TV

TYPE” in “SCREEN SETUP” of the setup display,

the picture does not fill the screen.

, The aspect ratio is fixed on your DVD.

The picture is black and white.

, In the setup display, set “LINE” in ”CUSTOM

SETUP” to the appropriate item that conforms to

your TV. (page 60)

, Depending on the TV, the picture on the screen

becomes black and white when you play a disc

recorded in the NTSC color system.

Sound

There is no sound.

, Check that the player is connected securely.

, The audio connecting cord is damaged. Replace it

with a new one.

, Make sure you connect the player to the audio

input connectors on the receiver (amplifier). (page

12)

, Make sure you turn on the TV and the receiver

(amplifier).

, Make sure you select the appropriate input on the

receiver (amplifier) so that you can listen to the

sound from the player.

, The player is in pause mode or in Slow-motion

Play mode. Press H to return to normal play

mode.

, The player is in fast forward or fast reverse mode.

Press H to return to normal play mode.

, Check the speaker connections and setting (page

15, 66). Refer to the operating manual of your

receiver (amplifier).

, If you use the DIGITAL OUT connectors, set

“DIGITAL OUT” to ”ON” in the setup display.

Otherwise no sound will come from the DIGITAL

OUT connectors. (page 64)

Sound is noisy.

, Clean the disc.

, When you play a CD with DTS sound tracks, noise

will come from any connector other than the

DIGITAL OUT OPTICAL or COAXIAL connector.

(page 19)

Sound distortion occurs.

, In the setup display, set “AUDIO ATT” in ”AUDIO

SETUP” to “ON.” (page 64)

The sound loses its stereo effect when you play a

VIDEO CD or a CD.

, Set “AUDIO” to “STEREO” in the Control Menu

display. (page 34)

, Make sure you connect the player correctly. (pages

8, 12, 15)

The surround effect is difficult to hear when you

are playing a Dolby Digital, MPEG, or DTS sound

track.

, Check the speaker connections and setting (pages

15, 66). Refer to the operating manual of your

receiver (amplifier).

, Depending on the DVD, the output signal may not

be the entire 5.1 channels. It may be monaural or

stereo even if the sound track is recorded in Dolby

Digital, MPEG, or DTS format.

The sound comes from the center speaker only.

, Depending on the disc, the sound may come from

the center speaker only.

, Set “VIRTUAL 3D SURROUND” to “OFF” in the

Control Menu display. (page 38)

Operation

The remote does not function.

, Remove any obstacles between the remote and the

player.

, Use the remote near the player.

, Point the remote at the remote sensor

on the

player.

, Replace all of the batteries in the remote with new

ones if they are weak.

The disc does not play.

, There is no disc inside (“Insert disc.” appears on

the TV screen).

Insert a disc.

, Insert the disc correctly with the playback side

facing down on the disc tray.

, Clean the disc.

, The player cannot play CD-ROMs, etc. (page 5)

Insert a DVD, a VIDEO CD, or CD.

, Check the region code of the DVD. (page 4)

, Moisture has condensed inside the player. Remove

the disc and leave the player turned on for about

half an hour. (page 6)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony DVP-S735D Bedienungsanleitung Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Sony DVP-S735D