Sony RDR-HX1010 Betriebsanleitung PDF herunterladen (Seite 100)

100

TV Pause does not work.

, You are recording to the HDD or the HDD is full.

The programme position cannot be changed

from the programme position you are

recording.

, Set the TV’s input source to “TV.”

Recording does not start immediately after you

press z REC.

, Operate the recorder only after “LOAD,”

“FORMAT,” or “INFOWRITE” disappears

from the front panel display.

Nothing was recorded even though you set the

timer setting correctly.

, There was a power failure during recording.

, The recorder’s internal clock stopped due to a

power failure that lasted for more than 1 hour.

Reset the clock (page 86).

, The channel was disabled after the timer

recording was set. See “Channel Setting” on

page 82.

, Disconnect the mains lead from the mains, and

connect it again.

, “PDC/VPS Scan Off” was selected in the

TOOLS menu (page 44).

, The programme contains copy protection signals

that restrict copying.

, Other timer setting overlapped the timer setting

(page 49).

, There is no DVD inside the recorder.

, There is not enough disc space for the recording.

, The recorder was in the process of DV Dubbing.

Recording does not stop immediately after you

press x REC STOP.

, It will take a few seconds for the recorder to input

disc data before recording can stop.

Recording does not stop after you press x.

, Open the remote’s cover and press x REC

STOP.

Timer recording is not complete or did not start

from the beginning.

, There was a power failure during recording. If

the power recovers when there is a timer

recording, the recorder resumes recording.

Should the power failure continue for more than

1 hour, reset the clock (page 86).

, Other timer setting overlapped the timer setting

(page 49).

, Disc space was not enough.

, The PDC/VPS function is working.

Contents previously recorded were erased.

, Data that has been recorded on a DVD with a PC

will be erased from the disc when the disc is

inserted.

, “Auto Title Erase” in the TOOLS menu (appears

when you press TOOLS while the Timer List

menu is turned on) is set to “On” (page 50).

, The title was updated and recorded over

(page 43).

The PDC/VPS function does not operate.

, Check that the clock and date are set correctly.

, Check that the PDC/VPS time you set is the

correct one (there might be a mistake in the TV

programme guide). If the broadcast you wanted

to record did not send the good PDC/VPS

information, the recorder will not start recording.

, If the reception is poor, the PDC/VPS signal

might be altered and the recorder might not start

recording.

, “PDC/VPS Scan Off” is selected (page 44).

Nothing was recorded even though you set the

Synchro-Rec setting correctly.

, You forgot to turn off the connected equipment.

Turn off the connected equipment and set the

recorder to Synchro-Rec standby mode

(page 50).

, The recorder was not set to the Synchro-

Recording standby mode. Press SYNCHRO

REC to have the recorder stand by for recording.

Make sure the SYNCHRO REC indicator lights

up on the front panel (page 50).

, The recorder is connected to the TV output jack

of the connected equipment.

Recording/Timer recording/

Editing

Recording from the equipment

with a timer

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony RDR-HX1010 Betriebsanleitung Seite 100

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Sony RDR-HX1010