Sony RDR-HX750 Betriebsanleitung PDF herunterladen (Seite 13)

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 through 6 to hook up and

adjust the settings of the recorder. Do not

connect the mains lead until you reach

“Step 4: Connecting the Mains Lead” on

page 20.

b Notes

• See “Specifications” (page 136) for a list of

supplied accessories.

• Plug in cords securely to prevent unwanted noise.

• Refer to the instructions supplied with the

components to be connected.

• You cannot connect this recorder to a TV that

does not have a SCART or video input jack.

• Be sure to disconnect the mains lead of each

component before connecting.

Step 1: Connecting the

Aerial Cable and Set Top

Box Controller

Select one of the following aerial hookups.

Do NOT set “LINE 1 In” to “Decoder” in the

“Video In/Out” setup (page 114) when

making connection A.

If the set top box receiver can output RGB

signals

This recorder accepts RGB signals. If the set

top box receiver can output RGB signals,

connect the TV SCART connector on the set

top box receiver to the LINE 1/DECODER

jack, and set “LINE 1 In” to “RGB” in the

“Video In/Out” setup (page 114). See the

instructions supplied with the set top box

receiver.

The set top box receiver control function can

be used with hookup A. It allows the recorder

to control a set top box receiver via the

supplied set top box controller. The recorder

controls programme positions on the set top

box receiver for timer recording. You can

also use the recorder’s remote control to

change programme positions on the set top

box receiver whenever the set top box

receiver and recorder are turned on.

To use the set top box receiver control

function, you need to connect the set top box

controller (page 14). After setting up the set

top box receiver control, check that the

recorder can correctly control the set top box

receiver (page 24).

b Notes

• If your aerial is a flat cable (300-ohm twin lead

cable), use an external aerial connector (not

supplied) to connect the aerial to the recorder.

• If you have separate cables for AERIAL

antennas, use an AERIAL UHF/VHF band mixer

(not supplied) to connect the aerial to the

recorder.

• If you disconnect the recorder’s mains lead, you

will not be able to view the signals from the

connected set top box receiver.

If you have Hookup

Set top box receiver A (page 14)

No set top box receiver B (page 15)

Using the set top box receiver

control function

,continued

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony RDR-HX750 Betriebsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Sony RDR-HX750