Sony DAV-HDX274 Bedienungsanleitung

©2008 Sony Corporation3-873-757-11(1)DVD Home Theatre SystemOperating InstructionsDAV-HDX274

10USGetting StartedStep 1: Positioning the SystemFor the best possible surround sound, all the speakers other than the subwoofer should be placed at t

11USGetting StartedTo install the speakers on a wallBefore installing the speakers on a wall, connect the speaker cord to the speaker.Be sure to match

12USGetting StartedNote• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the sc

13USGetting StartedStep 2: Connecting the SystemSee the connection diagram below, and read the additional information from 1 to 5 on the following pag

14USGetting StartedThe connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Be sure to match th

15USGetting StartedUse the parts as follows:•Video cord (1)• HDMI cable (1)To listen to TV sound from the six speakers of the system, connect the TV a

16USGetting Started** HDMI (High-Definition Multimedia Interface)If your TV has the HDMI jack, use this connection and select the type of output signa

17USGetting StartedYou can enjoy the connected component using the six speakers of the system.• Portable audio source: A• DIGITAL MEDIA PORT adapter:

18USGetting StartedIf your TV has multiple audio/video inputsYou can enjoy the sound with the speakers of the system through the connected TV. Connect

19USGetting StartedNote• Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result.• Be sure to full

2USTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.Caution – The use of optical instruments with this p

20USGetting StartedBefore connecting the AC power cord (mains lead) of the unit to a wall outlet (mains), connect all the speakers to the unit.After c

21USGetting StartedStep 3: Performing the Quick SetupFollow the Steps below to make the basic adjustments for using the system.Note• When you connect

22USGetting Started10 Press .11 Connect the calibration mic to the A.CAL MIC jack on the front panel.Set up the calibration mic at the ear level using

23USGetting StartedDepending on the connection of the TV (page 15), select the type of video output of the system.To select the type of video signal o

24USGetting StartedThe system outputs the progressive signal for 5 seconds. Check that the screen is displayed correctly.9 Press C/c to select [YES],

25USGetting StartedNote• When you use both the TV/VIDEO (AUDIO IN) jacks (analog connection) and TV/VIDEO (COAXIAL or OPTICAL DIGITAL IN) jack (digita

26USEnjoying Surround Sound by Using Decoding ModeYou can enjoy surround sound simply by selecting one of the system’s pre-programmed decoding modes.

Sound Adjustment27US4 Press .The setting is made.5 Press SYSTEM MENU.The system menu turns off.To turn the surround effect offSelect “A.F.D. STD” or “

28USSelecting the Sound ModeYou can select a suitable sound mode for movies or music.Press SOUND MODE repeatedly during playback until the desired mod

Disc29USPlaying a DiscDepending on the DVD VIDEO or VIDEO CD, some operations may be different or restricted.Refer to the operating instructions suppl

3US11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the ma

30USsystem. For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 55).Tip• The DISC 1-5 indicators change their color as foll

Disc31USof the internal mechanisms and does not indicate a malfunction.To turn on/off the DISC 1-5 indicators’ illuminationWhen you do not operate the

32USNote• [2: MAIN], [2: SUB], and [2: MAIN+SUB] do not appear when one audio stream is recorded on the disc.x VIDEO CD/CD/DATA CD (MP3 file)/DATA DVD

Disc33USThe options for [MULTI/2CH] appear.3 Press X/x to select the desired setting and press .• [MULTI]: You can play the multi-channel playback ar

34USWhen you stop the disc, the system remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not

Disc35USUsing Play ModeYou can play the contents of a disc in the order you want by arranging the order of the tracks on the disc to create your own p

36USTo cancel all of the tracks in the programmed order1 Follow Steps 1 to 3 of “Creating your own program.”2 Press X and select [ALL CLEAR].3 Press .

Disc37US• [TRACK]: You can repeat the current track.x DATA CD/DATA DVD•[OFF]: Off.• [ALL DISCS]: You can repeat all of the discs.• [ONE DISC]: You can

38USThis function is only available for DVD-VRs with a playlist created.1 Press DISPLAY while the system is in stop mode.The Control Menu display ap

Disc39USFor example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning. Press 2, 1, 0, 2, 0 ([2:10:20]).4 Press .Note• You

4USTable of ContentsAbout This Operating Instructions...3Playable Discs...5Getting StartedStep 1: Positio

40US2 Press X/x to select a folder.x To play MP3 files in a folderPress H to start playing the selected folder.x To select a MP3 filePress .The list o

Disc41USreturn to the previous folder, select the folder from the folder list.To rotate a JPEG image fileWhen a JPEG image file is displayed on the TV

42US• [FAST]: You can set the duration shorter than [NORMAL].• [SLOW 1]: You can set the duration longer than [NORMAL].• [SLOW 2]: You can set the dur

Disc43USRestricting Playback of the Disc[PARENTAL CONTROL]Playback of some DVD VIDEOs can be limited according to a predetermined level such as the ag

44USTo turn off the [PARENTAL CONTROL] functionSet [LEVEL] to [OFF] in Step 11.To play a disc for which [PARENTAL CONTROL] is set1 Load the disc and p

Disc45USUsing the Setup DisplayYou can make various adjustments of items such as picture and sound.Displayed items vary depending on the country model

46USx [OSD] (On-Screen Display)You can switch the display language on the TV screen.x [MENU] (DVD VIDEO only)You can switch the language for the disc’

Disc47USThe system outputs the progressive signal for 5 seconds. Check that the screen is displayed correctly.3 Press C/c to select [YES], then press

48US** Depending on the country model, [720 × 576p] may appear.x [CONTROL FOR HDMI]You can set the [CONTROL FOR HDMI] function to on/off. This functio

Disc49US– You play a DATA CD or DATA DVD to the end and the system stops playback automatically.x [SPEAKER FORMATION]You can select the position of th

5USPlayable Discs1)MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio data. MP3 files must be in MPEG1 Audio La

50USx [PARENTAL CONTROL]You can set the playback restrictions. For details, see “Restricting Playback of the Disc” (page 43).x [MULTI-DISC RESUME] (DV

Disc51US4)This item appears when you set [CENTER] to [YES] in the [CONNECTION] setting.x [DISTANCE (SURROUND)]When you move the surround speakers, be

52USPresetting Radio StationsYou can preset 20 FM stations, and 10 AM stations. Before tuning, make sure to turn down the volume to minimum.Tip• You c

Tuner53USListening to the RadioPreset radio stations in the system’s memory first (see “Presetting Radio Stations” (page 52)).1 Press FUNCTION +/– rep

54USYou can input letters, numbers, and other symbols for a radio station.If you make a mistakePress C/c repeatedly until the character to be changed

Control for HDMI/External Audio Device55USUsing the Control for HDMI Function for “BRAVIA” SyncThis function is available on TVs with the “BRAVIA” Syn

56USTo set the [CONTROL FOR HDMI] function to on/off1 Press FUNCTION +/– repeatedly until “DVD” appears in the front panel display.2 Press DISPLAY w

Control for HDMI/External Audio Device57USplaying a CD), the system may not turn off automatically.(System Audio Control)You can enjoy TV sound in thi

58USUsing the DIGITAL MEDIA PORT AdapterThe DIGITAL MEDIA PORT (DMPORT) adapter is for enjoying sound from a portable audio source or computer. By con

Other Operations59USGetting Optimal Surround Sound for a Room[SPEAKER FORMATION]Depending on the shape of the room, you cannot install some speakers.

6US2)JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image standards for digital cameras regula

60USCalibrating the Appropriate Settings Automatically[AUTO CALIBRATION]D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround

Other Operations61US– front and surround speakers are not correctly connected.10 Press C/c to select [YES] or [NO], then press .x The measurement is O

62USUsing the Sound EffectYou can reinforce bass frequencies.Press DYNAMIC BASS.“D. BASS ON” appears in the front panel display and bass frequencies a

Other Operations63USChanging the Brightness of the Front Panel DisplayThe brightness of the front panel display can be set to either of 2 levels.1 Pre

64USNote• The system can only display the first level of the DVD/CD text, such as the disc name or title.• If a file name of the MP3 file cannot be di

Other Operations65US* The bit rate appears when the system is playing an MP3 file on a DATA CD/DATA DVD.** If an MP3 file has the ID3 tag, the system

66US5 Press X/x to select [SYSTEM SETUP], then press .The options for [SYSTEM SETUP] appear.6 Press X/x to [RESET] and press c.7 Press C/c to select

Additional Information67USPrecautionsOn power sources• Unplug the unit from the wall outlet (mains) if you do not intend to use it for an extended per

68USNotes about the DiscsOn handling discs• To keep the disc clean, handle the disc by its edge. Do not touch the surface.• Do not stick paper or tape

Additional Information69USTroubleshootingIf you experience any of the following difficulties while using the system, use this troubleshooting guide to

7US• This system can play a Multi Session CD when an MP3 file is contained in the first session. Any subsequent MP3 files recorded in later sessions c

70USPictureSymptom RemedyThere is no picture. • The video connecting cords are not connected securely.• The video connecting cords are damaged.• The u

Additional Information71USSoundSymptom RemedyThere is no sound. • The speaker cord is not connected securely.• Press MUTING on the remote if “MUTING O

72USOperationNo sound or only a very low-level sound is heard from the surround speakers.• Check the speaker connections and settings (pages 14, 50).•

Additional Information73USThe JPEG image file cannot be played.• The DATA CD is not recorded in a JPEG format that conforms to ISO 9660 Level 1/Level

74USThe system does not work normally.• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.T

Additional Information75USSelf-diagnosis Function (When letters/numbers appear in the display)When the self-diagnosis function is activated to prevent

76USSpecificationsAUDIO POWER SPECIFICATIONSfor the US modelPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:With 3 ohms loads, both channels driven, from 1

Additional Information77USRated impedance 1.5 ohmsDimensions (approx.) 225 mm × 395 mm × 325 mm (8 7/8 in × 15 5/8 in × 12 7/8 in) (w/h/d)Mass (approx

78USx Music modeThe Music mode is for use with any stereo music recordings, and provides a wide and deep sound space.Dolby Surround Pro LogicAs one me

Additional Information79USA Super Audio CD layer consists of the 2 channel area or the multi-channel area.• 2 channel area: An area in which 2 channel

8USGetting StartedGetting StartedUnpacking• Front speakers (2) and surround speakers (2)• Center speaker (1)• Subwoofer (1)• AM loop antenna (aerial)

80USLanguage Code ListThe language spellings conform to the ISO 639: 1988 (E/F) standard.Code Language Code Language Code Language Code Language1027 A

Additional Information81USIndex to Parts and ControlFor more information, refer to the pages indicated in parentheses.A "/1 (on/standby) (21, 65)

82USA SPEAKER jacks (14)B FM COAXIAL 75Ω jack (19)C AM terminal (19)D TV/VIDEO (AUDIO IN R/L) jacks (15, 17)E VIDEO OUT jack (15)F COMPONENT VIDEO OUT

Additional Information83USAbout the indications in the front panel displayA Playing statusB Flashes when the sleep timer is set. (62)C Displays system

84USRemote controlALPHABETICAL ORDER BUTTON DESCRIPTIONSA – O P – ZANGLE 3 (31)AUDIO qh (31)CLEAR es (35, 45, 53)D.TUNING ws (53)DISC SKIP ed (29)DISP

Additional Information85USGuide to the Control Menu DisplayYou can use the Control Menu display to select a function and to view related information.

86USExample: Control Menu display 1 when playing a DVD VIDEO.To turn off the displayPress DISPLAY.List of Control Menu itemsItem Item Name, Function,

Additional Information87USTip• The Control Menu icon indicator lights up in yellow when you select any item except [OFF] ([PROGRAM], [SHUFFLE], [REP

88USIndexNumerics4:3 OUTPUT 475.1 Channel Surround 32AA/V SYNC 42ANGLE 31ATTE NUAT E 25AUDIO 46AUDIO (HDMI) 48AUDIO DRC 49AUDIO SETUP 49AUTO CALIBRAT

9USGetting StartedInserting batteries into the remoteInsert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the

(1)Sony Corporation Printed in China