Sony STR-DE435 Bedienungsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 30
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
9
Getting Started
AC Hookups
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET on the receiver, the receiver
can supply power to the connected components so you
can turn on/off the whole system when you turn on/
off the receiver.
Caution
Make sure that the power consumption of the component
connected to the receiver’s AC outlet does not exceed 120
watts. Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
to a wall outlet
/
SWITCHED AC OUTLET
Before You Use Your Receiver
Before turning on the receiver
Make sure that you have:
Turned MASTER VOLUME to the leftmost
position (0).
Selected the appropriate front speakers (see “Front
Panel Parts Description” on page 12).
Set BALANCE to the center position.
Clearing the receiver's memory
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the
procedure below:
1 Turn off the receiver.
2 Press 1/u (power) for more than 4 seconds.
“ALL CLEAR” appears in the display and the
items including the following are reset or cleared:
All preset stations are reset to their factory
settings.
All sound field parameters are reset to their
factory settings.
All index names (of preset stations and program
sources) are cleared.
All adjustments made with the SET UP button are
reset to their factory settings.
The sound field memorized for each program
source and preset station is cleared.
After turning on the receiver
Check the following indicator:
Press MUTING or MUTING on the remote if the
MUTING indicator turns on.
Press DIMMER to set the display at any of four levels
of brightness.
DIMMER
MUTING
1/u (power)
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare