SDX-1100V SDX-1100V/R 5.25”Model Product Specification Manual Version 1.0 August, 2006 Copyright © 2006, Sony Corporation. All right
1.Introduction 1-2 SONY AIT-5 drive SDX-1100V series Ver. 1.0 1040 Gbyte with 2.6:1 Data Compression •
6.Command Specification MODE SELECT 6-46 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.7.3. Data Compression Control Page (0Fh) The drive supports t
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-47 6.7.4. Device Configuration Page (10h) The drive supports the D
6.Command Specification MODE SELECT 6-48 SONY AIT-5 drive SDX-1100V series Ver.1.0 SOCF: Stop on Consecutive Filemarks function is not supported
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-49 6.7.5. Medium Partitions Parameter Page (11h) The drive support
6.Command Specification MODE SELECT 6-50 SONY AIT-5 drive SDX-1100V series Ver.1.0 Medium Format Recognition: This field is only valid on a MODE S
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-51 6.7.6. Informational Exceptions Control Page (1Ch) The Informat
6.Command Specification MODE SELECT 6-52 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.7.7. AIT Device Configuration Page (31h) Note 1: The values
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-53 PONEJ: This bit is recorded in drive’s EEPROM, and it effects t
6.Command Specification MODE SENSE 6-54 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.8. MODE SENSE (6/10) 1Ah and 5Ah Table 6-51: Mode Sense (6)
MODE SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-55 Supported page codes are: Table 6-54: Supported MODE SENSE Page
1.Introduction SONY AIT-5 drive SDX-1100V series Ver.1.0 1-3 1.4. Reference Please refer to the followi
6.Command Specification MODE SENSE 6-56 SONY AIT-5 drive SDX-1100V series Ver.1.0 Media Type: The media value will be ZERO as only one media type
PERSISTENT RESERVE IN 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-57 6.9. PERSISTENT RESERVE IN 5Eh Bit Byte 7 6 5 4 3 2 1
6.Command Specification PERSISTENT RESERVE IN 6-58 SONY AIT-5 drive SDX-1100V series Ver.1.0 GENERATION: This field will contain a 32-bit counter
PERSISTENT RESERVE IN 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-59 SCOPE: The value in this field indicates whether a pe
6.Command Specification PERSISTENT RESERVE OUT 6-60 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.10. PERSISTENT RESERVE OUT 5Fh Bit Byte 7 6 5 4 3
PERSISTENT RESERVE OUT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-61 Table 6-63: PERSISTENT RESERVE OUT parameter list Bi
6.Command Specification PREVENT ALLOW MEDIUM REMOVAL 6-62 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.11. PREVENT ALLOW MEDIUM REMOVAL 1Eh Bit Byt
READ 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-63 6.12. READ 08h Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (08h) 1 Res
6.Command Specification READ 6-64 SONY AIT-5 drive SDX-1100V series Ver.1.0 the media will be physically positioned before EOD and after the last
READ ATTRIBUTE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-65 6.13. READ ATTRIBUTE 8Ch The READ ATTRIBUTE command allow
1.Introduction 1-4 SONY AIT-5 drive SDX-1100V series Ver. 1.0 This page intentionally left blank.
6.Command Specification READ ATTRIBUTE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-66 Table 6-66: READ ATTRIBUTE service action codes Code Name
READ ATTRIBUTE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-67 Table 6-67: READ ATTRIBUTE with ATTRIBUTE VALUES service ac
6.Command Specification READ ATTRIBUTE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-68 6.13.3. PARTITION LIST service action The READ ATTRIBUTE com
READ BLOCK LIMITS 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-69 6.14. READ BLOCK LIMITS 05h Bit Byte 7 6 5 4 3 2 1 0 0
6.Command Specification READ BUFFER SONY AIT-5 drive SDX-1100V series Ver.1.0 6-70 6.15. READ BUFFER 3Ch Bit Bite 7 6 5 4 3 2 1 0 0 Operation Cod
READ BUFFER 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-71 Table 6-73: READ BUFFER Header Bit Byte 7 6 5 4 3 2 1 0 0 Res
6.Command Specification READ BUFFER SONY AIT-5 drive SDX-1100V series Ver.1.0 6-72 Echo Buffer (1010b) - In this mode the drive transfer data to
READ POSITION 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-73 6.16. READ POSITION 34h Bit Byte 7 6 5 4 3 2 1 0 0 Operati
6.Command Specification READ POSITION SONY AIT-5 drive SDX-1100V series Ver.1.0 6-74 BPU: A Block Position Unknown (BPU) bit of one indicates that
RECEIVE DIAGNOSTIC RESULTS 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-75 6.17. RECEIVE DIAGNOSTIC RESULTS 1Ch Bit Byte 7
2.Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 2-1 2. Specifications Physical, environmental
6.Command Specification RECEIVE DIAGNOSTIC RESULTS SONY AIT-5 drive SDX-1100V series Ver.1.0 6-76 Table 6-81: RECEIVE DIAGNOSTICS results data Bit
RELEASE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-77 6.18. RELEASE (6/10) 17h and 57h RELEASE( 6) CDB format Bit Byte
6.Command Specification RELEASE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-78 Parameter List Length: The contents of this field specify the lengt
REPORT DENSITY SUPPORT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-79 6.19. REPORT DENSITY SUPPORT 44h Bit Byte 7 6 5 4 3
6.Command Specification REPORT DENSITY SUPPORT SONY AIT-5 drive SDX-1100V series Ver.1.0 6-80 Table 6-84: REPORT DENSITY SUPPORT data block descri
REPORT DENSITY SUPPORT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-81 116 (MSB) CAPACITY (LSB) 119 120 (MSB) 127
6.Command Specification REPORT DEVICE IDENTIFIER SONY AIT-5 drive SDX-1100V series Ver.1.0 6-82 6.20. REPORT DEVICE IDENTIFIER A3h Bit Byte 7 6
REPORT LUNS 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-83 6.21. REPORT LUNS A0h Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code
6.Command Specification REQUEST SENSE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-846.22. REQUEST SENSE 03h Bit Byte 7 6 5 4 3 2 1 0 0 Operation
REQUEST SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-85 Table 6-87: Error Codes 70h and 71h Sense Data Format Bit Byte
2.Specification 2-2 SONY AIT-5 drive SDX-1100V series Ver. 1.0 2.1.1.1. Mounting Holes Figure 2-2a giv
6.Command Specification REQUEST SENSE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-86Additional Sense Length: This field specifies the number of ad
REQUEST SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-87 CLN: When this bit is set, it indicates drive request cleaning
6.Command Specification REQUEST SENSE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-88 MEDIUM ERROR. Indicates that the current command or a previ
REQUEST SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-89 HARDWARE ERROR. Indicates that the drive detected a non-reco
6.Command Specification REQUEST SENSE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-90 55 04 INSUFFICIENT REGISTRATION RESOURCES (attempt to reg
REQUEST SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-91 ABORTED COMMAND 43 00 MESSAGE ERROR – Unexpected Message
6.Command Specification REQUEST SENSE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-92Table 6-91:Runtime Error Code 00h NO ERROR 01h NO TAPE 02h OFF
RESERVE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-93 6.23. RESERVE (6/10) 16h and 56h Table 6-92: RESERVE (6) CDB format Bi
6.Command Specification RESERVE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-94 3rdPty: Third Party Release allows an initiator to reserve a logica
REWIND 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-95 6.24. REWIND 01h Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (01h) 1 R
2.Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 2-3 79.2 0.3mm [3.12" 0.01"]79.
6.Command Specification SEND DIAGNOSTIC SONY AIT-5 drive SDX-1100V series Ver.1.0 6-96 6.25. SEND DIAGNOSTIC 1Dh Bit Byte 7 6 5 4 3 2 1 0 0 Oper
SEND DIAGNOSTIC 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-97 For Page Code 81h, the Page Length must be five and the Param
6.Command Specification SET DEVICE IDENTIFIER A4h SONY AIT-5 drive SDX-1100V series Ver.1.0 6-98 6.26. SET DEVICE IDENTIFIER A4h Table 6-97: SET D
SPACE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-99 6.27. SPACE 11h Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (11h) 1 Res
6.Command Specification SPACE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-100 Table 6-100: SPACE CHECK CONDITION results Sense Data Spacing Event
SPACE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-101 6.27.1. CHECK CONDITION NO SENSE: If a Filemark is encountered while s
6.Command Specification TEST UNIT READY 00h SONY AIT-5 drive SDX-1100V series Ver.1.0 6-102 6.28. TEST UNIT READY 00h Bit Byte 7 6 5 4 3 2 1 0 0
WRITE 0Ah 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-103 6.29. WRITE 0Ah Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (0Ah)
6.Command Specification WRITE ATTRIBUTE SONY AIT-5 drive SDX-1100V series Ver.1.0 6-104 6.30. WRITE ATTRIBUTE 8Dh The WRITE ATTRIBUTE command (Ta
WRITE ATTRIBUTE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-105 The parameter list will have the format shown in Table 6-103
2.Specification 2-4 SONY AIT-5 drive SDX-1100V series Ver. 1.0 2.1.2. Weight SDX-1100V 0.8 kg, without
6.Command Specification WRITE BUFFER 6-106 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.31. WRITE BUF
WRITE BUFFER 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-107 Buffer Offset: Th
6.Command Specification WRITE FILEMARKS 6-108 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.32. WRITE FI
7.Drive Diagnostics SONY AIT-5 drive SDX-1100V series Ver.1.0 7-1 7. Drive Diagnostics This clause deals
7.Drive Diagnostics 7-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 If an error is detected during power-up, the drive will return a CHECK CONDITION st
7.Drive Diagnostics SONY AIT-5 drive SDX-1100V series Ver.1.0 7-3 The Page Format (PF) bit is ONE, and
7.Drive Diagnostics 7-4 SONY AIT-5 drive SDX-1100V series Ver.1.0 Sequence Test 00 Reset Sequence (61, 62, 71,72, 30) H Main Processor Kernel Tes
7.Drive Diagnostics SONY AIT-5 drive SDX-1100V series Ver.1.0 7-5 Error set: Two set of error codes exis
7.Drive Diagnostics 7-6 SONY AIT-5 drive SDX-1100V series Ver.1.0 This page intentionally left blank.
8.APPENDIX A: ASC & ASCQ Alphabetic Order SONY AIT-5 drive SDX-1100V series Ver.1.0 8-1 8. APPENDI
2.Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 2-5 2.2.2. Altitude Operating 0 to 10,000 f
8.APPENDIX A: ASC & ASCQ Alphabetic Order 8-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 04 10 LOGICAL UNIT NOT READY, AUXILIARY MEMORY NOT ACC
9.APPENDIX B: ASC & ASCQ Numeric Order SONY AIT-5 drive SDX-1100V series Ver.1.0 9-1 9. APPENDIX
9.APPENDIX B: ASC & ASCQ Numeric Order 9-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 2A 03 RESERVATION PREEMPTED 2A 05 REGISTRATION PREEMPTED 2C
10.APPENDIX C: ASC & ASCQ for AIT (Sony Unique) SONY AIT-5 drive SDX-1100V series Ver.1.0 10-1 10.
10.APPENDIX C: ASC & ASCQ for AIT (Sony Unique) 10-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 This page intentionally left blank.
11.APPENDIX D: SCSI Commands (OP Code Order) SONY AIT-5 drive SDX-1100V series Ver.1.0 11-1 11. APPENDIX D: SCSI Commands (Op Code Order) The followi
11.APPENDIX D: SCSI Commands (OP Code Order) 11-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.26 SET DEVICE ID A4h 6-98 6.20 REPORT DEVICE ID A3
12.APPENDIX E: Medium Auxiliary Memory Attribute SONY AIT-5 drive SDX-1100V series Ver.1.0 12-1 12. APPENDIX E: Medium Auxiliary Memory Attribute 12
12.APPENDIX E: Medium Auxiliary Memory Attribute 12-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 Table 12-2:
12.APPENDIX E: Medium Auxiliary Memory Attribute SONY AIT-5 drive SDX-1100V series Ver.1.0 12-3 The READ
2.Specification 2-6 SONY AIT-5 drive SDX-1100V series Ver. 1.0 1010101010101010 Figure 2-4: Mounting Att
12.APPENDIX E: Medium Auxiliary Memory Attribute 12-4 SONY AIT-5 drive SDX-1100V series Ver.1.0 Table 12-6:
12.APPENDIX E: Medium Auxiliary Memory Attribute SONY AIT-5 drive SDX-1100V series Ver.1.0 12-5 0006h FO
12.APPENDIX E: Medium Auxiliary Memory Attribute 12-6 SONY AIT-5 drive SDX-1100V series Ver.1.0 Table 12-8:
12.APPENDIX E: Medium Auxiliary Memory Attribute SONY AIT-5 drive SDX-1100V series Ver.1.0 12-7 The CURR
12.APPENDIX E: Medium Auxiliary Memory Attribute 12-8 SONY AIT-5 drive SDX-1100V series Ver.1.0 Table 12-9:
12.APPENDIX E: Medium Auxiliary Memory Attribute SONY AIT-5 drive SDX-1100V series Ver.1.0 12-9 12.4.4.
12.APPENDIX E: Medium Auxiliary Memory Attribute 12-10 SONY AIT-5 drive SDX-1100V series Ver.1.0 Note: The F
12.APPENDIX E: Medium Auxiliary Memory Attribute SONY AIT-5 drive SDX-1100V series Ver.1.0 12-11 Note: I
12.APPENDIX E: Medium Auxiliary Memory Attribute 12-12 SONY AIT-5 drive SDX-1100V series Ver.1.0 This page intentionally
13.Appendix F: AIT based WORM system SONY AIT-5 drive SDX-1100V series Ver.1.0 13-1 13. APPENDIX F: AI
2.Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 2-7 2.3.2. Data transfer Rate 2.3.2.1. Sust
13.Appendix F: AIT based WORM system 13-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 How to initialize a WOR
14.Appendix G: CD-ROM Device Emulation for Disaster Recovery SONY AIT-5 drive SDX-1100V series Ver.1.0 14-1
14.Appendix G: CD-ROM Device Emulation for Disaster Recovery 14-2 SONY AIT-5 drive SDX-1100V series Ver.1.0
Notice This document contains proprietary information which is protected by copyright. All rights reserved. No part of this document may be photocopie
2.Specification 2-8 SONY AIT-5 drive SDX-1100V series Ver. 1.0 2.3.8. Long Erase Time Long Erase Time
2.Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 2-9 2.4. Safety The SDX-1100V conforms to th
2.Specification 2-10 SONY AIT-5 drive SDX-1100V series Ver. 1.0 2.6. Data Compression The tape capacity
3.Installation SONY AIT-5 drive SDX-1100V series Ver.1.0 3-1 3. Installation 3.1. Installation Guide T
3.Installation 3-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 1 DR (Desaster Recovery) Mode 2 Emu
3.Installation SONY AIT-5 drive SDX-1100V series Ver.1.0 3-3 3.1.3. Parity Disable Jumper Parity chec
3.Installation 3-4 SONY AIT-5 drive SDX-1100V series Ver.1.0 Table 3-4: SDX-1100V SCSI Signals (Low-
3.Installation SONY AIT-5 drive SDX-1100V series Ver.1.0 3-5 Table 3-5: SDX-1100V SCSI Signals (Single-
3.Installation 3-6 SONY AIT-5 drive SDX-1100V series Ver.1.0 3.1.7. Attaching and Removing the Dust Co
3.Installation SONY AIT-5 drive SDX-1100V series Ver.1.0 3-7 3.1.7.2. Removing the Dust Cover (1) Op
SDX-1100V series Ver.1.0 Table of Contents Table of Contents 1. INTRODUCTION...
3.Installation 3-8 SONY AIT-5 drive SDX-1100V series Ver.1.0 This page intentionally left blank.
4.Operation SONY AIT-5 drive SDX-1100V series Ver.1.0 4-1 4. Operation 4.1. Summary of LED Indications T
4.Operation 4-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 4.2. Operator Action 4.2.1. Powering up the
4.Operation SONY AIT-5 drive SDX-1100V series Ver.1.0 4-3 4.3. Internal Function 4.3.1. The
4.Operation 4-4 SONY AIT-5 drive SDX-1100V series Ver.1.0 4.3.4. Diagnostic and Normal Status Displa
4.Operation SONY AIT-5 drive SDX-1100V series Ver.1.0 4-5 Table 4-2: Normal LED indications LED Tape Mo
4.Operation 4-6 SONY AIT-5 drive SDX-1100V series Ver.1.0 4.6. Maintenance, Troubleshooting and Service
4.Operation SONY AIT-5 drive SDX-1100V series Ver.1.0 4-7 A tape is in the drive and will not eject. If
4.Operation 4-8 SONY AIT-5 drive SDX-1100V series Ver.1.0 Detail A Photo 2: The Initial P
4.Operation SONY AIT-5 drive SDX-1100V series Ver.1.0 4-9 The drive powers up properly and loads and unl
SDX-1100V series Ver.1.0 Table of Contents 3. INSTALLATION...
4.Operation 4-10 SONY AIT-5 drive SDX-1100V series Ver.1.0 This page intentionally left blank.
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-1 5. SCSI Interface 5.1. Introduction The
5.SCSI Interface 5-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 5.1.3. Supported Commands The following commands are supported. They include all
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-3 5.2. SCSI Bus Operation 5.2.1. Typical
5.SCSI Interface 5-4 SONY AIT-5 drive SDX-1100V series Ver.1.0 4. The I/O activity from this point is controlled entirely by the target. The t
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-5 5.3.1. COMMAND COMPLETE (00h) This me
5.SCSI Interface 5-6 SONY AIT-5 drive SDX-1100V series Ver.1.0 The TRANSFER WIDTH EXPONENT field defines the transfer width to be used during DAT
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-7 Table 5-4: Synchronous Data Transfer Rat
5.SCSI Interface 5-8 SONY AIT-5 drive SDX-1100V series Ver.1.0 The implied synchronous agreement shall remain in effect until a BUS DEVICE RESET
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-9 Following target response (1) above, the
SDX-1100V series Ver.1.0 Table of Contents 5.3.2.3. WIDE DATA TRANSFER REQUEST...
5.SCSI Interface 5-10 SONY AIT-5 drive SDX-1100V series Ver.1.0 5.3.6. INITIATOR DETECTED ERROR (05h) This message is sent from an initiator
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-11 5.3.11. BUS DEVICE RESET (0Ch) This
5.SCSI Interface 5-12 SONY AIT-5 drive SDX-1100V series Ver.1.0 5.4. Status Specification A Status byte is sent from the drive to the Host during
5.SCSI Interface SONY AIT-5 drive SDX-1100V series Ver.1.0 5-13 10h INTERMEDIATE GOOD: This status is
5.SCSI Interface 5-14 SONY AIT-5 drive SDX-1100V series Ver.1.0 This page intentionally left blank.
6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-1 6. Command Specification This clause includes all supported SCSI Commands. El
6.Command Specification ERASE 6-2 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.1. ERASE 19h Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (19h) 1
INQUIRY 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-3 6.2. INQUIRY 12h Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (12h) 1
6.Command Specification INQUIRY 6-4 SONY AIT-5 drive SDX-1100V series Ver.1.0 Table 6-2: Standard INQUIRY Data Bit Byte 7 6 5 4 3 2 1 0 0 Periphe
INQUIRY 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-5 Sync: The drive supports synchronous data transfers, so this bit is s
SDX-1100V series Ver.1.0 Table of Contents 6.22. REQUEST SENSE 03h...
6.Command Specification INQUIRY 6-6 SONY AIT-5 drive SDX-1100V series Ver.1.0 The product serial number field contains ASCII data that is vendor-s
INQUIRY 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-7 Command support data If the drive implements the requested SCSI opera
6.Command Specification LOAD/UNLOAD 6-8 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.3. LOAD/UNLOAD 1Bh Bit Byte 7 6 5 4 3 2 1 0 0 Operation
LOAD/UNLOAD 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-9 When the drive receives the UNLOAD, the tape is rewound to BOM a
6.Command Specification LOCATE 6-10 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.4. LOCATE 2Bh Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (2Bh)
LOG SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-11 6.5. LOG SELECT 4Ch Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (
6.Command Specification LOG SELECT 6-12 SONY AIT-5 drive SDX-1100V series Ver.1.0 The purpose of the Log Select command is to allow the initiator
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-13 6.6. LOG SENSE 4Dh Bit Byte 7 6 5 4 3 2 1 0 0 Operation Code (4D
6.Command Specification LOG SENSE 6-14 SONY AIT-5 drive SDX-1100V series Ver.1.0 Page Code: The Page Code field identifies which log page is being
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-15 Table 6-10: Log Page Format Bit Byte 7 6 5 4 3 2 1 0 0 Reserved
SDX-1100V series Ver.1.0 Table of Contents 14. APPENDIX G: CD-ROM DEVICE EMULATION FOR DISASTER RECOVERY...
6.Command Specification LOG SENSE 6-16 SONY AIT-5 drive SDX-1100V series Ver.1.0 TSD: A target save disable (TSD) bit of ZERO indicates a target-d
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-17 6.6.3. Summary List of Supported Pages (00h) The summary list of
6.Command Specification LOG SENSE 6-18 SONY AIT-5 drive SDX-1100V series Ver.1.0 The following parameter codes are supported for each Error Counte
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-19 6.6.6. Tape Alert Log Page (2Eh) Bit Byte 7 6 5 4 3 2 1 0 0 R
6.Command Specification LOG SENSE 6-20 SONY AIT-5 drive SDX-1100V series Ver.1.0 Tape Alert Log Page Parameter Codes Code Flag Flag Type Recomm
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-21 Code Flag Flag Type Recommended application client message P
6.Command Specification LOG SENSE 6-22 SONY AIT-5 drive SDX-1100V series Ver.1.0 Code Flag Flag Type Recommended application client message P
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-23 Code Flag Flag Type Recommended application client message P
6.Command Specification LOG SENSE 6-24 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.6.7. Tape Log Page (30h) (Sony Unique) This page is a Sony uni
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-25 6.6.8. Tape Capacity Log Page (31h) (Sony Unique) The tape Capac
SDX-1100V series Ver.1.0 Table of Contents This page intentionally left blank.
6.Command Specification LOG SENSE 6-26 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.6.9. Drive Usage Log Page (33h) (Sony Unique) This page is a S
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-27 All board revision number is 8 bytes long and has a following for
6.Command Specification LOG SENSE 6-28 SONY AIT-5 drive SDX-1100V series Ver.1.0 Parameter Code Length Default Cumulative Default Threshold 000
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-29 The Error Counter Parameter format is shown in Table 6-33 Table 6
6.Command Specification LOG SENSE 6-30 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.6.11. Data Compression Transfer Log Page (39h) (Sony Unique)
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-31 6.6.12. AIT Log Page (3Ch) (Sony Unique) This page is for the A
6.Command Specification LOG SENSE 6-32 SONY AIT-5 drive SDX-1100V series Ver.1.0 Total Rewritten Frames: This is the total number of frames on th
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-33 6.6.13. MIC Fixed Length Information Page (3Dh) (Sony Unique) T
6.Command Specification LOG SENSE 6-34 SONY AIT-5 drive SDX-1100V series Ver.1.0 Parameter Code 0017h Drive Element Address data field is reserved
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-35 Bit Byte 7 6 5 4 3 2 1 0 0 (MSB) Parameter Code (0006h)
1.Introduction SONY AIT-5 drive SDX-1100V series Ver.1.0 1-1 1. Introduction 1.1. About this Product
6.Command Specification LOG SENSE 6-36 SONY AIT-5 drive SDX-1100V series Ver.1.0 28 33 (MSB) PREVIOUS AMOUNT OF DATA WRITTEN (LSB) 34 39 (MSB)
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-37 Bit Byte 7 6 5 4 3 2 1 0 0 (MSB) Parameter Code (0016h)
6.Command Specification LOG SENSE 6-38 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.6.14. MIC Variable Length Information Page (3Eh) (Sony Unique
LOG SENSE 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-39 Note: 1. If there is no Note data in MIC for the Parameter Co
6.Command Specification MODE SELECT 6-40 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.7. MODE SELECT(6/10) 15h and 55h Mode Select (6) CDB Format:
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-41 The MODE SELECT parameter list has the following format. Table
6.Command Specification MODE SELECT 6-42 SONY AIT-5 drive SDX-1100V series Ver.1.0 Density Code: The supported values for the density code field
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-43 Supported page codes are: Table 6-42: Supported MODE SELECT Pa
6.Command Specification MODE SELECT 6-44 SONY AIT-5 drive SDX-1100V series Ver.1.0 6.7.1. Disconnect-Reconnect Page (02h) The drive supports the D
MODE SELECT 6.Command Specification SONY AIT-5 drive SDX-1100V series Ver.1.0 6-45 6.7.2. Control Mode Page (0Ah) Bit Byte 7 6 5 4 3 2 1 0 0 PS
Kommentare zu diesen Handbüchern