Sony SRS-BTV5 Bedienungsanleitung PDF herunterladen (Seite 15)

Help Guide

SRS-BTV5 Top > Getting Started > Power >

Getting Started

BLUETOOTH

One touch connection (NFC)

Music

Phone calls

Troubleshooting

Important information

Contents list

Charging the system

The system contains a lithium ion rechargeable battery, which should be charged before

using the system for the first time. You can use the speaker while charging the battery.

System requirements for battery charge using USB

Personal Computer with pre-installed with any of the following operating systems and USB

port:

Operating Systems

(when using Windows)

Windows® 7

Home Basic / Home Premium / Professional / Ultimate

Windows Vista® (Service Pack 2 or later)

Home Basic / Home Premium / Business / Ultimate

Windows® XP (Service Pack 3 or later)

Home Edition / Professional / Media Center Edition 2004 / Media Center Edition 2005

(when using Macintosh)

Mac OS X (version 10.3 or later)

Charging the system

1. Open the jack cover of the system.

2. Connect the supplied micro-USB cable to the system, and then connect the other end

to a computer.

Make sure that you connect the plug of the micro-USB cable in the direction as shown

in the illustration below.

Charging starts when the system and the computer are connected.

Make sure that the BATT/CHG indicator (orange) lights up. Charging is completed in about 3

hours* and the BATT/CHG indicator (orange) goes off automatically.

* Time required to charge the empty battery to its full capacity

Notes

If the system is not used for a long time, the BATT/CHG indicator (orange) may not light

up when you connect the micro-USB cable to charge the system. In this case, do not

disconnect the micro-USB cable from the system and wait until the BATT/CHG indicator

(orange) lights up.

SearchSearch

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Keine Kommentare

Sony SRS-BTV5 Bedienungsanleitung Seite 15