Sony CDX-GS500R Bedienungsanleitung PDF herunterladen (Seite 27)

27

ERROR

 The disc is dirty or inserted upside down.

– Clean or insert the disc correctly.

 A blank disc has been inserted.

 The disc cannot play due to a problem.

–Insert another disc.

 USB device was not automatically recognized.

– Connect it again.

 Press  to remove the disc.

FAILURE

 The connection of speakers/amplifiers is

incorrect.

– See the installation/connections manual of

this model to check the connection.

HUB NO SUPRT (Hubs Not Supported)

 USB hub is not supported on this unit.

NO AF (No Alternative Frequencies)

 There is no alternative frequency for the

current station.

–Press  +/– while the program service

name is flashing. The unit starts searching

for another frequency with the same PI

(Program Identification) data (“PI SEEK”

appears).

NO DEV (No Device)

 “USB” is selected as source without a USB

device connected. A USB device or a USB cable

has been disconnected during playback.

– Be sure to connect a USB device and USB

cable.

NO DISC

 The disc is ejected, or “CD” is selected as the

source without inserting the disc.

NO MUSIC

 The disc or USB device does not contain a

music file.

– Insert a music CD in this unit.

– Connect a USB device with a music file in it.

NO NAME

 A disc/album/artist/track name is not written

in the track.

NO TP (No Traffic Programs)

 The unit will continue searching for available

TP stations.

NOT FOUND

 There is no item beginning with the selected

letter in Alphabet search.

OFFSET

 There may be an internal malfunction.

– Check the connection. If the error indication

remains on in the display, consult your

nearest Sony dealer.

OVERLOAD

 USB device is overloaded.

– Disconnect the USB device, then change the

source by pressing .

– Indicates that the USB device is out of order,

or an unsupported device is connected.

PUSH EJT (Push Eject)

 The disc cannot be ejected.

– Press  (eject) (page 5).

READ

 The unit is reading all track and album

information on the disc.

– Wait until reading is complete and playback

starts automatically. Depending on the disc

structure, it may take more than a minute.

USB NO SUPRT (USB Not Supported)

 The connected USB device is not supported.

– For details on the compatibility of your USB

device, visit the support site.

“” or “”

 During reverse or fast-forward, you have

reached the beginning or the end of the disc

and you cannot go any further.

“”

 The character cannot be displayed with the

unit.

For App Remote:

APP -------- (Application)

 Connection with the application is not made.

– Establish iPhone connection again.

APP MENU (Application Menu)

 Button operation cannot be performed while a

menu on iPhone is open.

–Exit the menu on iPhone.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 159 160

Kommentare zu diesen Handbüchern

Keine Kommentare