Sony XDCAM EX Bedienungsanleitung PDF herunterladen (Seite 56)

56

Error displays/Messages

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

The stations cannot be received.

The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the

power supply lead of a car’s aerial booster.

(Only if your car has a built-in FM/MW/LW

aerial in the rear/side glass.)

• Check the connection of the car aerial.

• The auto aerial will not go up.

tCheck the connection of the power aerial

control lead.

• Check the frequency.

• When the DSO mode is on, the sound is

sometimes hampered by noises.

tSet the DSO mode to “OFF” (page 42).

Automatic tuning is not possible.

• The local seek mode is set to “ON.”

tSet the local seek mode to “OFF” (page

41).

• The broadcast signal is too weak.

tPerform manual tuning.

The “STEREO” indication flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

tSet to the monaural reception mode (page

41).

A programme broadcast in stereo is heard

in monaural.

The unit is in monaural reception mode.

tCancel monaural reception mode (page

41).

RDS

Seek starts after a few seconds of listening.

The station is non-TP or has weak signal.

tPress (AF) or (TA) repeatedly until

“” or “” disappears.

No traffic announcements.

• Activate TA function.

• The station does not broadcast any traffic

announcements despite being TP.

tTune in another station.

PTY displays “--------.”

• The current station is not an RDS station.

• RDS data has not been received.

• The station does not specify the programme

type.

A F T A

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about

5 seconds, and an alarm sound will be heard.

Blank*

1

No tracks have been recorded on an MD.*

2

tPlay an MD with recorded tracks on it.

Cannot Play

• The unit cannot playback certain files due to

a difference in format.

• Try to playback audio data with data limits

that are not compatible with the unit.

tYou can erase data from the “Memory

Stick” using a device that is compatible

with “Memory Stick.”

Error*

1

• A CD is dirty or inserted upside down.*

2

tClean or insert the CD correctly.

• A CD/MD cannot play because of some

problem.*

2

tInsert another CD/MD.

Expired

• Try to playback audio data with expired data

limits.

• Try to playback audio data with data limits,

but the clock has not been set.

tYou must set the date in the menu.

File Error

• Cannot read the data.

• The data is damaged or corrupted.

tCheck-in data to your computer, then

reformat the “Memory Stick” using other

device that is compatible with “Memory

Stick.”

High Temp

The ambient temperature is more than 50°C.

tWait until the temperature goes down

below 50°C.

Locked

The “Memory Stick” erasure prevention

switch is set to “LOCK.”

tSet the “Memory Stick” erasure prevention

switch to off.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare