Sony XR-C503 Bedienungsanleitung PDF herunterladen (Seite 15)

15

Actual total number: Sony XR-C503 (E,Pl,Bg,Hu,R) 3-858-089-11(2)

EN

Additional

Information

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

• If your car is equipped with a power aerial,

note that it will extend automatically while

the unit is operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Notes on cassette deck tape heads

•Long use of cassette tapes contaminates the

tape head causing poor sound quality or

complete sound dropout. Therefore, we

recommend cleaning the tape head once a

month or so with the separately available

Sony Cassette Cleaning Set. If the sound does

not improve after using a cleaning cassette,

please consult your nearest Sony dealer.

• In case of old or inferior cassette tapes, the

tape head gets contaminated much more

quickly. Depending on the tape, one or two

playbacks may cause poor sound.

Cassette care

•Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

•Do not expose cassettes to direct sunlight,

extremely cold temperatures or moisture.

•When the tape is played back for a long

period, the cassette shell may become warm

because of the built-in power amplifier.

However, this is not a sign of a malfunction.

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tapes used for these cassettes are

very thin and tend to be stretched easily.

Frequent playing and stopping of these tapes

may cause them to be pulled into the cassette

deck mechanism.

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

that matches the amperage described on the

fuse. If the fuse blows, check the power

connection and replace the fuse. If the fuse

blows again after replacement, there may be an

internal malfunction. In such a case, consult

your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. To prevent this, open the

front panel by pressing (OPEN), then detach it

and clean the connectors with a cotton swab

dipped in alcohol. Do not apply too much

force. Otherwise, the connectors may be

damaged.

Main unit

Back of the front panel

CD/MD Changer/Additional Information

Fuse (15 A)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 112 113

Kommentare zu diesen Handbüchern

Keine Kommentare