Sony DVP-NS611H Bedienungsanleitung PDF herunterladen (Seite 35)

Settings and Adjustments

◆ DTS

Selects the type of DTS audio signals.

• When you play a DVD VIDEO with DTS sound

tracks, set “DTS” to “ON” in “AUDIO SETUP”

(page 35).

• If you connect the player to audio equipment

without a DTS decoder, do not set “DTS” to “ON”

in “AUDIO SETUP” (page 35). A loud noise may

come out from the speakers, affecting your ears or

causing the speakers to be damaged.

• If the HDMI OUT jack is connected to equipment

not compatible with DTS signals, the “OFF”

signals will be automatically output even when

you select “ON.”

◆ 48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio

signal.

• The analog audio signals from the LINE OUT

L/R (AUDIO) jacks are not affected by this

setting and keep their original sampling frequency

level.

• If the HDMI OUT jack is connected to equipment

not compatible with 96 kHz/24 bit signals,

48 kHz/16 bit PCM will be automatically output

even when you select “96kHz/24bit.”

HDMI SETUP

You can adjust items related to the HDMI

connection.

◆ HDMI RESOLUTION

Selects the type of video signals output from

the HDMI OUT jack. When you select

AUTO (1920×1080p) (default), the player

outputs video signals of the highest resolution

acceptable for your TV. If the picture is not

clear, natural or to your satisfaction, try

another option that suits the disc and your

TV/projector, etc. For details, refer also to the

instruction manual supplied with the TV/

projector, etc.

You cannot select this when “PhotoTV HD”

mode is activated (page 28).

To reset the setting

If the picture does not appear normal or goes

blank, press [/1 to turn off the player, and

enter “369” using the number buttons on the

remote, then press [/1 to turn on the player

again.

In case of “AUTO (1920×1080p),” the player

automatically adjusts the video signals that are

suitable for the TV.

Other cases, the player directly send the signal even

if TV cannot accept.

◆ JPEG RESOLUTION

Selects the type of JPEG resolution so that

you can enjoy high picture quality via your

HDMI connection.

You cannot select this when “HDMI

RESOLUTION” is set to “720×480p” or “TV

TYPE” is set to “4:3 LETTER BOX” or “4:3

PAN SCAN.”

OFF Select this when the player is

connected to an audio

component without a built-in

DTS decoder.

ON Select this when the player is

connected to an audio

component with a built-in DTS

decoder.

48kHz/16bit

The audio signals of DVD

VIDEOs are always converted

to 48kHz/16bit.

96kHz/24bit All types of signals including

96kHz/24bit are output in their

original format. However, if the

signal is encrypted for

the signal is only output as

48kHz/16bit.

AUTO

(1920

1080p)

Normally, select this.

1920

1080i

Sends 1920×1080i video

signals.

1280

720p

Sends 1280×720p video

signals.

720

480p

Sends 720×480p video signals.

PhotoTV HD

Displays extra highly-detailed

picture when connecting to a

Sony’s “PhotoTV HD”-

compatible device.

,continued

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony DVP-NS611H Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Sony DVP-NS611H