Sony SDM-E76D Bedienungsanleitung PDF herunterladen (Seite 42)

18 (GB)

Trouble symptoms and remedies

If a problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual.

Symptom Check these items

No picture

If the 1 (power) indicator is not lit,

or if the 1 (power) indicator will not

light up when the 1 (power) switch

is pressed,

• Check that the power cord is properly connected.

If CABLE DISCONNECTED

appears on the screen,

• Check that the video signal cable is properly connected and all plugs are firmly seated in

their sockets (page 6).

• Check that the video input connector’s pins are not bent or pushed in.

• Check that the input select setting is correct (page 8).

• A non-supplied video signal cable is connected. If you connect a non-supplied video

signal cable, CABLE DISCONNECTED may appear on the screen before entering the

power saving mode. This is not a malfunction.

If NO INPUT SIGNAL appears on

the screen, or the 1 (power)

indicator is orange,

• Check that the video signal cable is properly connected and all plugs are firmly seated in

their sockets (page 6).

• Check that the video input connector’s pins are not bent or pushed in.

• Check that the input select setting is correct (page 8).

x Problems caused by a computer or other equipment connected, and not

caused by the monitor

• The computer is in the power saving mode. Try pressing any key on the keyboard or

moving the mouse.

• Check that your graphics board is installed properly.

• Change your graphic board to the latest driver. Or match the version of your graphic board

to the current OS.

• When using a laptop computer, set the output of your computer to video out (for details on

video out setting, contact your computer manufacturer).

• Check that the computer’s power is on.

• Restart the computer.

If OUT OF RANGE appears on the

screen,

x Problems caused by a computer or other equipment connected, and not

caused by the monitor

• Check that the video frequency range is within that specified for the monitor. If you

replaced an old monitor with this monitor, reconnect the old monitor and adjust the

computer’s graphics board within the following ranges:

Horizontal: 28–80 kHz (analog RGB), 28–64 kHz (digital RGB for SDM-E76D/SDM-

E96D only)

Vertical: 56–75 Hz (analog RGB), 60 Hz (digital RGB for SDM-E76D/SDM-E96D only)

Resolution: 1280 × 1024 or less

• Start your OS in Safe mode and restart the computer after setting the resolution. The

setting of safe mode varies depending on your OS. For more details, contact your

computer manufacturer.

If you are using Windows and

replaced an old monitor with this

monitor,

• If you replaced an old monitor with this monitor, reconnect the old monitor and do the

following. Select “SONY” from the “Manufacturers” list and select the desired model

name from the “Models” list in the Windows device selection screen. If the model name

of this monitor does not appear in the “Models” list, try “Plug & Play.”

If using a Macintosh system, • If you use the Macintosh adapter (not supplied), check that the Macintosh adapter and the

video signal cable are properly connected.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 348 349

Kommentare zu diesen Handbüchern

Bryanherly 07 Apr 2024 | 19:27:58

Hello! Crazy discounts, hurry up! We are Drop Dead Studio and our goal is to help companies achieve impressive sales results through automated marketing. I. We sell fresh databases for GSA Search Engine Ranker. • The databases are updated monthly through 24/7 parsing and by connecting purchased databases from other sources. • You have the option to purchase a one-time fresh database or pay for a lifetime subscription for updates. ATTENTION! 40% discount only until 04/10/2024! When ap

Sony SDM-E76D Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Monitore Sony SDM-E76D