Sony EX480CP Bedienungsanleitung PDF herunterladen (Seite 42)

Command List

VISCA Device Setting

Command

Before starting control of the FCB camera, be sure to

send the Address command and the IF_Clear

command using the broadcast function.

For VISCA Network Administration

● Address

Sets an address of a peripheral device. Use when

initializing the network and when receiving the

network change message indicated below.

● Network Change

Sent from the peripheral device to the controller

when a device is removed from or added to the

network. The address must be re-set when this

message is received.

Packet Note

Address 88 30 01 FF Always broadcasted.

Network Change X0 38 FF

X = 9 to F: FCB camera address + 8

VISCA Interface Command

● IF_Clear

Clears the command buffers in the FCB camera and

cancels the command currently being executed.

Command Packet Reply Packet Note

IF_Clear 8X 01 00 01FF X0 50 FF

IF_Clear (broadcast) 88 01 00 01 FF 88 01 00 01 FF

X = 1 to 7: FCB camera address (For inquiry packet)

X = 9 to F: FCB camera address +8 (For reply packet)

VISCA Interface and Inquiry

● CAM_VersionInq

Returns information on the VISCA interface.

Inquiry Inquiry Packet Reply Packet Description

CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG GGGG = Vender ID

HH HH JJ JJ (0020: Sony)

KK FF HHHH = Model ID

0434 = FCB-EX480C

0435 = FCB-EX480CP

0436 = FCB-EX48C

0437 = FCB-EX48CP

JJJJ = ROM revision

KK = Maximum socket # (02)

X = 1 to 7: FCB camera address (For inquiry packet)

X = 9 to F: FCB camera address +8 (For reply packet)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony EX480CP Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Sony EX480CP