Sony KDL-32BX330 Bedienungsanleitung PDF herunterladen (Seite 42)

Troubleshooting

Many of the poor pictures and poor sound conditions are related to improper connection of the cables; refer to

the Quick Setup Guide provided for connections.

If you have questions, service needs, or require technical assistance related to the use of your Sony TV even

after you read this operating instructions manual, contact the following:

For US Support:

http://www.sony.com/tvsupport

or call 1-800-222-SONY (7669)

For Canadian Support:

http://www.sony.ca/support

or call 1-877-899-SONY (7669)

Things to consider

• Check the input selection by pressing the INPUT button. You may be watching the wrong input.

• If you cannot hear sound from the TV, you may have accidentally pressed the MUTING button on your

remote control; press the MUTING button again or press VOL + to deactivate muting.

• If the remote control is not functioning properly, the batteries may be installed incorrectly or may be low or

an object or light may be interfering with the remote control.

• To reset the TV to factory default settings:

1 Turn on the TV.

2 Press and hold down the V button on the remote, press the 1 button on the TV set. (The TV will turn

itself off, then back on again.)

3 Release the V button when the TV is turn on.

IMPORTANT: The factory reset will clear all of your customized settings including the Parental Lock

setting.

When the Password is lost or cannot remember, enter the master password: 4357. This password clears your

previous password and allows you to enter a new password.

Condition Explanation/Solution

No picture

No picture • Check the Power Saving settings (see page 34).

Cannot receive any

channels

• Make sure the power cord is connected securely.

• Turn on the power of the TV.

• Check cable/antenna connections.

• Make sure the Signal Type setting is correct for your TV signal source.

TV is locked to one channel • Perform Auto Program to add receivable channels that are not present

in the TV’s memory (see pages 17 and 29).

Cannot receive or select

channels

• Perform Auto Program to add receivable channels that are not present

in the TV’s memory (see pages 17 and 29).

• To receive or select cable channels, make sure that Signal Type in the

Channel settings is set to Cable (see page 29). To receive or select

UHF channels over an antenna, make sure Signal Type is set to

Antenna.

The TV turns off

automatically

•Check if Sleep Timer is activated (see page 34).

•Check the Auto Shut Off settings (see page 34).

No picture from some video

sources

• Check the connection between the optional video equipment and the TV.

•Press INPUT on the remote control (see page 23).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony KDL-32BX330 Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher Sony KDL-32BX330