Sony PCLK-LSA2 Bedienungsanleitung PDF herunterladen (Seite 14)

Starting the software

Notes

• Before starting the software, be sure to set all the power control

functions in the “Power Properties” window to off.

• Do not turn on or off the computer during recording on MDS-LSA1.

If you do so, the recording may not be done properly.

• Only the following buttons on the deck or remote can be used to

operate MDS-LSA1 while the software is running:

x, A, DISPLAY, HX, N, X, ./>, m/M

• MDS-LSA1 will not be automatically attached* if you start the

software while MDS-LSA1 is in the middle of the CD Synchro-

Recording. To attach this component, start the software after first

stopping the CD Synchro-Recording, or wait until the CD Synchro-

Recording ends and then use the right-click menu in the Audio Rack

View to attach the component.

* •When you select “Attach”, the specified component is attached to the

i.LINK configuration, allowing you to check the condition of the

component and control it.

•Only one STR-LSA1 can be attached at a time.

, Click “Start”, point to “Program”, point to “Digital Link

Manager for LISSA 2.0E”, and then click “LISSA”.

This software is then started and the Digital Link Manager Main

Window appears.

When you start the software, the following display appears (when

MD is selected as the sound source):

If nothing appears in the Audio Rack View when you start up the

software for the first time, see page 9.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Keine Kommentare

Sony PCLK-LSA2 Bedienungsanleitung Seite 14