Sony PCV-RX401 Bedienungsanleitung PDF herunterladen (Seite 74)

Sony VAIO Desktop User Guide

Upgrading your VAIO computer

Inserting a PCI add-on board

Your computer has open PCI expansion slots. These slots enable you to install add-on boards to expand the

functionality of your system.

Add-on board configuration can vary.

To insert an add-on board, proceed as follows:

1 Shut down your computer and turn off all peripheral

devices, such as your printer.

2 Unplug your computer and any peripheral devices.

3 Remove the side cover as described in

Opening the side cover (page 71).

4 Locate one of the two available expansion slots.

5 Remove the screw, and then remove the slot cover, as

shown.

6 Install the add-on board by plugging it into the

expansion slot and secure it with the screw from the

expansion slot, as shown.

7 Attach any internal cables that the board requires (see

the manual that came with the add-on board).

8 Replace the side cover as described in

Closing the side cover (page 78).

9 Reconnect all peripheral devices and the power cord,

and then turn on the computer.

✍ Make sure you observe the proper safety precautions when you add boards to

your VAIO computer.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 89 90

Keine Kommentare

Sony PCV-RX401 Bedienungsanleitung Seite 74