Sony STR-DA5300ES Betriebsanleitung PDF herunterladen (Seite 46)

46

GB

You can select the front speakers you want to

drive.

Set the SPEAKERS switch to select

the front speaker system you want

to drive.

Note

This setting is not available when headphones are

connected.

9: Calibrating the

appropriate speaker

settings automatically

(Auto Calibration)

The DCAC (Digital Cinema Auto Calibration)

function allows you to perform automatic

calibration, such as checking the connection

between each speaker and the receiver,

adjusting the speaker level, and measuring the

distance of each speaker from your seating

position automatically. Refer also to “Quick

Setup Guide” supplied with the receiver.

Before you perform the auto calibration, set up

and connect the speakers (page 16-19).

• The AUTO CAL MIC jack is used for the

supplied optimizer microphone only. Do not

connect other microphones. Doing so may

damage the receiver and the microphone.

• During the measurement, the sound that

comes out of the speakers is very loud. The

volume of the sound cannot be adjusted. Pay

attention to the presence of children or to the

effect on your neighborhood.

• Perform the measurement in a quiet

environment to avoid the effect of noise and

get a more accurate measurement.

• If there are any obstacles in the path between

the optimizer microphone and the speakers,

the calibration cannot be performed

correctly. Remove any obstacle from the

measurement area to avoid measurement

error.

• When you use a bi-amplifier connection, set

“Sur Back Assign” to “BI-AMP” in the

Speaker settings menu before you perform

auto calibration.

Selecting the front speakers

Set to To select

A The speakers connected to the

FRONT SPEAKERS A terminals.

B The speakers connected to the

FRONT SPEAKERS B terminals.

A+B The speakers connected to both the

FRONT SPEAKERS A and B

terminals (parallel connection).

OFF No audio signals are output from

any speaker terminals, or the PRE

OUT jacks.

SPEAKERS switch

Before you perform the auto

calibration

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 141 142

Kommentare zu diesen Handbüchern

Keine Kommentare