Sony HDR-FX1E Bedienungsanleitung PDF herunterladen (Seite 83)

Troubleshooting

If you run into any problem using your

camcorder, use the following table to

troubleshoot the problem. If the problem

persists, remove the power source and

contact your Sony dealer.

If “C:ss:ss” is displayed on the LCD

screen or the viewfinder, the self-diagnosis

display function is activated. See page 88 for

details.

Overall operations

Batteries/Power sources

Symptom Cause and/or Corrective Actions

The power does not turn on. • The battery pack is discharged, running low, or not attached to the

camcorder.

cAttach a charged battery pack to the camcorder (p. 11).

cUse the AC Adaptor to connect to the wall socket (p. 14).

The camcorder does not operate even

when the power is set to on.

cDisconnect the AC Adaptor from the wall socket or remove the battery

pack, then reconnect it after about 1 minute. If the functions still do not

work, press the RESET button using a sharp-pointed object. If you press

the RESET button, all settings including the clock setting (except the

Personal Menu and Picture Profile settings) are reset.

A clattering noise is heard when the

camcorder is handled with the

POWER switch set to OFF (CHG) or

VCR.

• This is because some lens functions on the camcorder use a linear

mechanism. This is not a malfunction.

The supplied Remote Commander

does not function.

cSet [REMOTE CTRL] on the (OTHERS) menu to [ON] (p. 64).

cInsert batteries into the battery compartment with the + – polarities

correctly matching the + – marks. If this still does not solve the problem,

insert new batteries since the batteries are dead (p. 105).

cRemove any obstructions between the Remote Commander and the

remote sensor.

The camcorder gets warm. • This is because the power has been turned on for a long time. This is not

a malfunction.

Symptom Cause and/or Corrective Actions

The CHG (charge) lamp does not

light while the battery pack is being

charged.

cAttach the battery pack to the camcorder correctly. If the lamp still does

not light up, then it indicates that no power is supplied from the wall

socket.

• The battery charge is completed (p. 11).

,continued

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony HDR-FX1E Bedienungsanleitung Seite 83

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamerarekorder Sony HDR-FX1E