Sony HDR-FX1E Bedienungsanleitung PDF herunterladen (Seite 94)

Additional Information

94

About i.LINK

The i.LINK Interface on this unit is an i.LINK-

compliant Interface. This section describes the

i.LINK standard and its features.

What is i.LINK?

i.LINK is a digital serial interface for

transferring digital video, digital audio, and

other data to other i.LINK-compatible device.

You can also control other device using the

i.LINK.

i.LINK-compatible device can be connected

using an i.LINK cable. Possible applications are

operations and data transactions with various

digital AV devices.

When 2 or more i.LINK-compatible device are

connected to this unit in a daisy chain,

operations and data transactions are possible

with not only the device that this unit is

connected to but also with other devices via the

directly connected device.

Note, however, that the method of operation

sometimes varies according to the

characteristics and specifications of the device

to be connected. Also, operations and data

transactions may not be possible on some

connected device.

b Note

• Normally, only one device can be connected to this

unit with the i.LINK cable. When connecting this

unit to an HDV/DV compatible device having two or

more i.LINK Interfaces, refer to the operating

instructions of the device to be connected.

z Tip

• i.LINK is a more familiar term for the IEEE 1394

data transport bus proposed by Sony, and is a

trademark approved by many corporations.

• IEEE 1394 is an international standard standardized

by the Institute of Electrical and Electronics

Engineers.

About i.LINK Baud rate

i.LINK’s maximum baud rate varies according

to the device. There are 3 types.

S100 (approx. 100Mbps*)

S200 (approx. 200Mbps)

S400 (approx. 400Mbps)

The baud rate is listed under “Specifications” in

the operating instructions of each piece of

device. It is also indicated near the i.LINK

interface on some device.

The baud rate may differ from the indicated

value when the unit is connected to device with

a different maximum baud rate.

* What is Mbps?

Mbps stands for “megabits per second,” or the

amount of data that can be sent or received in

1 second. For example, a baud rate of 100 Mbps

means that 100 megabits of data can be sent in

1 second.

To use i.LINK functions on this unit

For details on how to dub when this unit is

connected to other video device having a

i.LINK Interface, see page 70.

This unit can also be connected to other i.LINK

compatible device made by Sony (e.g. a VAIO

series personal computer) as well as to video

device.

Some i.LINK compatible video device such as

Digital Televisions, DVD recorders/players,

and MICROMV recorders/players are not

compatible with this unit. Before connecting to

other device, be sure to confirm whether the

device is compatible with HDV/DV or not.

For details on precautions and compatible

application software, refer also to the operating

instructions for the device to be connected.

b Note

• When connecting your camcorder to another

i.LINK-compatible device, be sure to turn off the

power of the device and disconnect the AC Adaptor

from the wall socket before connecting or

disconnecting the i.LINK cable.

About the required i.LINK cable

Use the Sony i.LINK 4-pin-to-4-pin cable

(during HDV/DV dubbing).

i.LINK and are trademarks of Sony

Corporation.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare