Sony CMT-S20B Bedienungsanleitung PDF herunterladen

CMT-S20B.GB.4-460-928-12(2)

WARNING

To reduce the risk of fire, do not cover the

ventilation opening of the appliance with

newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame

sources (for example, lighted candles).

To reduce the risk of fire or electric shock,

do not expose this appliance to dripping or

splashing, and do not place objects filled with

liquids, such as vases, on the appliance.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

As the main plug is used to disconnect the unit

from the mains, connect the unit to an easily

accessible AC outlet. Should you notice an

abnormality in the unit, disconnect the main

plug from the AC outlet immediately.

Do not expose batteries or appliances with

battery-installed to excessive heat, such as

sunshine and fire.

The unit is not disconnected from the mains as

long as it is connected to the AC outlet, even if

the unit itself has been turned off.

CAUTION

The use of optical instruments with this product

will increase eye hazard.

This appliance is

classified as a CLASS

1 LASER product. This

marking is located on

the rear exterior.

Notice for customers: the

following information is only

applicable to equipment sold

in countries applying EU

directives.

This product has been manufactured by or on

behalf of Sony Corporation, 1-7-1 Konan Minato-

ku Tokyo, 108-0075 Japan. Inquiries related

to product compliance based on European

Union legislation shall be addressed to the

authorized representative, Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters,

please refer to the addresses provided in the

separate service or guarantee documents.

Disposal of Old

Electrical & Electronic

Equipment

(Applicable in the

European Union and

other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated

as household waste. Instead it shall be handed

over to the applicable collection point for the

recycling of electrical and electronic equipment.

By ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the environment

and human health, which could otherwise be

caused by inappropriate waste handling of this

product. The recycling of materials will help to

conserve natural resources. For more detailed

information about recycling of this product,

please contact your local Civic Office, your

household waste disposal service or the shop

where you purchased the product.

Applicable accessories: Remote commander

Europe Only

Disposal of waste

batteries (applicable in

the European Union

and other European

countries with

separate collection

systems)

This symbol on the battery or on the packaging

indicates that the battery provided with this

product shall not be treated as household

waste.

On certain batteries this symbol might be used

in combination with a chemical symbol. The

chemical symbols for mercury (Hg) or lead (Pb)

are added if the battery contains more than

0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of

correctly, you will help prevent potentially

negative consequences for the environment

and human health which could otherwise be

caused by inappropriate waste handling of the

battery. The recycling of the materials will help

to conserve natural resources.

In case of products that for safety, performance

or data integrity reasons require a permanent

connection with an incorporated battery, this

battery should be replaced by qualified service

staff only. To ensure that the battery will be

treated properly, hand over the product at end-

of-life to the applicable collection point for the

recycling of electrical and electronic equipment.

For all other batteries, please view the section

on how to remove the battery from the product

safely. Hand the battery over to the applicable

collection point for the recycling of waste

batteries.

For more detailed information about recycling

of this product or battery, please contact

your local Civic Office, your household waste

disposal service or the shop where you

purchased the product.

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side

with digital audio material on the other side.

However, since the audio material side does

not conform to the Compact Disc (CD) standard,

playback on this product is not guaranteed.

Music discs encoded with

technologies

This product is designed to playback discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

by some record companies. Please be aware

that among those discs, there are some that do

not conform to the CD standard and may not be

playable by this product.

License and Trademark Notice

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or other

countries.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use

or distribution of such technology outside of

this product is prohibited without a license

from Microsoft or an authorized Microsoft

subsidiary.

All other trademarks and registered

trademarks are of their respective holders. In

this manual,

and

marks are not specified.

Operations

Playing a file of the USB

device

The audio format that can be played back on this

system is MP3/WMA*.

* Files with DRM (Digital Rights Management)

this system.

Files downloaded from an online music store may

not be played back on this system.

Check the website below for the information

about compatible USB devices.

http://support.sony-europe.com/

1 Select the USB function.

Press USB



2 Connect the USB device to the (USB)

port



3 Start playback.

Press 



Other operations

To Press

Pause playback 



. To resume play, press





Stop playback 



. To resume play, press





*. To cancel resume

play, press 



again.

Select a folder

+/ 



repeatedly.

Select a file /



Find a point in a

file

Hold down /



during playback, and release

the button at the desired

point.

Select Repeat

Play

REPEAT



repeatedly until

“RPT 1,” “RPT FLDR” or “RPT

ALL” appears.

* When playing a VBR MP3/WMA file, the system

may resume playback from a different point.

To change the play mode

Press PLAY MODE



repeatedly while the USB

device is stopped. You can select normal play

(“FLDR” for all files in the folder on the USB

device), shuffle play (“SHUF” or “FLDRSHUF” for

folder shuffle), or program play (“PROGRAM”).

Note on Repeat Play

“RPT ALL” indicates that all audio files on a USB

device are repeated until you stop playback.

Notes

 When USB cable connection is necessary, connect

the USB cable supplied with the USB device to be

connected. See the operation manual supplied

with the USB device to be connected for details on

the operation method.

 It may take about 10 seconds before “SEARCH”

appears depending on the type of USB device

connected.

 Do not connect the system and the USB device

through a USB hub.

 When the USB device is inserted, the system reads

all the files on the USB device. If there are many

folders or files on the USB device, it may take a

long time to finish reading the USB device.

 With some connected USB devices, after an

operation is performed, there may be a delay

before it is performed by this system.

 Compatibility with all encoding/writing software

cannot be guaranteed. If audio files on the USB

device were originally encoded with incompatible

software, those files may produce noise or

interrupted audio, or may not play at all.

 This system cannot play audio files on the USB

device in the following cases;

 when the number of audio files in a folder

exceeds 999.

 when the total number of audio files on a USB

device exceeds 999.

 when the number of folders on a USB device

exceeds 256 (including the “ROOT” folder and

empty folders).

These numbers may vary depending on the file

and folder structure. Do not save other types of

files or unnecessary folders on a USB device that

has audio files.

 The system can play back to a depth of 8 folders

only.

 This system does not necessarily support all the

functions provided in a connected USB device.

 Files and folders are displayed in the order of their

creation on the USB device.

 Folders that have no audio files are skipped.

 The audio formats that you can listen to with this

system are as follows:

 MP3: file extension “.mp3”

 WMA: file extension “.wma”

Note that even when file name has the correct file

extension, if the actual file differs, the system may

produce noise or may malfunction.

To use the system as battery charger

You can use the system as a battery charger for

USB devices that have a rechargeable function

when the system is on.

The charging begins when the USB device is

connected to the

(USB) port



. The charge

status appears in the USB device display. For

details, see the user’s guide of your USB device.

Notes on charging the USB device with this

system

 You cannot use the system as a battery charger

when the system is off.

 Some USB devices can be charged only when the

system is in the USB function.

Getting Started

Unit

Remote

This manual mainly explains operations using the

remote, but the same operations can also be

performed using the buttons on the unit having

the same or similar names.

To use the remote

Slide and remove the battery compartment lid,

and insert the R6 (size AA) battery (not supplied),

 side first, matching the polarity shown below.

Notes on using the remote

 With normal use, the battery should last for about

six months.

 If you do not use the remote for a long period of

time, remove the battery to avoid damage from

battery leakage and corrosion.

When carrying this system

Remove a disc to protect the CD

mechanism.

2 Press  (on/standby)



on the unit to

turn off the system and confirm that

“STANDBY” stops flashing.

3 Unplug the power cord.

To set the clock

Press 



to turn on the system.

2 Press TIMER MENU



to select the clock

set mode.

If “SELECT” appears, press /



repeatedly to select “CLOCK,” and then press

(enter)



3 Press /



repeatedly to set the

hour, then press



4 Use the same procedure to set the

minutes.

Note

The clock settings are lost when you disconnect the

power cord or if a power failure occurs.

To display the clock when the system is

off

Press DISPLAY



. The clock is displayed for

about 8 seconds.

 ANTENNA

Find a location and orientation that provide good

reception when you set up the antenna.

Keep the antenna away from the speaker cords

and the power cord to avoid picking up noise.

Before unplugging the DAB/FM antenna, make

sure the system is turned off to preserve your

own DAB and FM settings.

 AUDIO IN jack

Connect an external audio component.

 SPEAKERS

Connect the speaker cords.

 Power

Connect the power cord to a wall outlet.

Listening to the radio

1 Select the DAB or FM function.

Press DAB



or FM



2 Perform tuning.

For tuning to a DAB/DAB+ station

Press PRESET+/PRESET



repeatedly to tune

to the desired station.

For automatic scanning (FM band only)

Press TUNING MODE



repeatedly until

“AUTO” appears, and then press TUNING+/

TUNING



. Scanning stops automatically

when a station is tuned in.

If the scanning for an FM station does not

stop, press 



to stop scanning, then

perform manual tuning (below).

For manual tuning (FM band only)

Press TUNING MODE



repeatedly until

“MANUAL” appears, and then press TUNING+/

TUNING



repeatedly to tune to the desired

station.

When you tune to a DAB/DAB+ station or an

FM station that provides RDS services, the

service name or station name appears on the

display.

Notes on DAB/DAB+ stations

 When tuning to a DAB/DAB+ station, it may take a

few seconds before you hear any sound.

 Primary service is automatically received when

secondary service ends.

 This tuner does not support data services.

Tip

To reduce static noise on a weak FM stereo station,

press FM MODE



repeatedly until “MONO” appears

to turn off stereo reception. You will lose stereo

effect, but reception will improve.

Running the DAB Automatic Scan

manually

Press TUNING MODE  repeatedly until

“SCAN” appears.

2 Press



to perform scanning.

Scanning begins. The scanning progress is

indicated as a percentage. Depending on the

DAB/DAB+ services available in your area,

scanning may take a few minutes.

When scanning is complete, a list of available

services is created.

Notes

 If your country or region does not support DAB/

DAB+ broadcast, “NO SERV” appears.

 This procedure clears all previously stored presets.

 Before unplugging the DAB/FM antenna, make

sure the system is turned off to preserve your own

DAB/DAB+ settings.

Presetting radio stations

Tune to the desired station.

2 Press TUNER MEMORY



to select the

tuner memory mode.

3 Press PRESET+/PRESET



repeatedly to

select the desired preset number.

If another station is already assigned to the

selected preset number, the station is replaced

by the new station.

4 Press



to store the station.

5 Repeat steps 1 through 4 to store other

stations.

You can preset up to 20 DAB/DAB+ and 20 FM

stations. The preset stations are retained for

about half a day even if you disconnect the

power cord or if a power failure occurs.

To tune to a preset radio station

If you registered a radio station to a preset

number 1 to 6, the radio station will be tuned in

by just pressing the TUNER MEMORY NUMBER (1

to 6)



when the system function is set to DAB

or FM.

If you registered a radio station to a preset

number 7 or higher, press TUNING MODE



repeatedly until “PRESET” appears then press

PRESET+/PRESET



repeatedly to select the

desired preset number.

Note on presetting DAB/DAB+ stations

You can preset a DAB/DAB+ service only when it can

be received.

Playing a CD/MP3/WMA disc

1 Select the CD function.

Press CD



2 Place a disc.

Press 



on the unit, and place a disc with

the label side up on the CD compartment.

To close the CD compartment, press 



the unit.

3 Start playback.

Playback of the CD-DA disc starts

automatically.

Press  (play)



to play a MP3/WMA disc.

Other operations

To Press

Pause playback  (pause)



. To resume play,

press 



Stop playback  (stop)



twice.

Select a folder

on an MP3/

WMA disc

(select folder) +/ 



repeatedly.

Select a track or

file



(go back)/



(go

forward)



Find a point in a

track or file

Hold down



(rewind)/



(fast forward)



during

playback, and release the

button at the desired point.

Select Repeat

Play

REPEAT



repeatedly until

“RPT 1,” “RPT FLDR*” or “RPT

ALL” appears.

* MP3/WMA disc only

To change the play mode

Press PLAY MODE



repeatedly while the player

is stopped. You can select normal play (“FLDR”

for all MP3/WMA files in the folder on the disc),

shuffle play (“SHUF” or “FLDRSHUF” for folder

shuffle), or program play (“PROGRAM”).

Note on Repeat Play

“RPT 1” indicates that a single track or file is repeated

until you stop playback.

Notes on playing MP3/WMA discs

 Do not save other types of files or unnecessary

folders on a disc that has MP3/WMA files.

 Folders that have no MP3/WMA files are skipped.

 MP3/WMA files are played back in the order that

they are recorded onto the disc.

 The audio formats that you can listen to with this

system are as follows:

 MP3: file extension “.mp3”

 WMA: file extension “.wma”

 Even when file name has the correct file extension,

if the actual file differs, playing this file may

generate a loud noise by which the system may

malfunction.

 The maximum number of:

 folders is 256 (including the root folder).

 MP3/WMA files is 999.

 folder levels (the tree structure of files) is 8.

 Compatibility with all MP3/WMA encoding/writing

software, recording device, and recording media

cannot be guaranteed. Incompatible MP3/WMA

discs may produce noise or interrupted audio or

may not play at all.

Note on playing multisession discs

The system can play back continuous sessions on a

disc when they are recorded in the same session

format as the first session. When a session recorded

in a different session format is encountered, that

session and the ones following it cannot be played

back. Note that even if the sessions are recorded in

the same format, some sessions may not play back.

 DAB/FM lead antenna (Extend it horizontally.)

 To right speaker

 To left speaker

Reception of DAB/DAB+ radio station

When you turn on the system for the first time

after you purchase the system, DAB Automatic

Scan starts automatically and creates a list of

available services. During the DAB Automatic

Scan, the scanning progress is indicated as a

percentage. Do not press any button on the unit

or the remote during DAB Automatic Scan.

Scanning is interrupted and service list may not

be created properly.

To run the DAB Automatic Scan manually,

perform the procedure of “Running the DAB

Automatic Scan manually” in “Listening to the

radio.” If you have moved to another area,

perform the DAB Automatic Scan manually and

re-register the contents of broadcasts.

To attach the speaker pads

Attach the supplied speaker pads at each corner

on the bottom of the speakers to prevent them

from slipping.

 Speaker cord (Red/)

 Speaker cord (Black/)

 To wall outlet

Home Audio System

Operating Instructions

CMT-S20B

4-460-928-12(2)

1 2

Inhaltsverzeichnis

Seite 1 - Home Audio System

CMT-S20B.GB.4-460-928-12(2)WARNINGTo reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curt

Seite 2 - FM tuner section:

CMT-S20B.GB.4-460-928-12(2)Creating your own program (Program Play)1 Select the CD or USB function.Press CD  or USB .2 Select the play mode.Press

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony CMT-S20B Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Auto-Medienempfänger Sony CMT-S20B herunter. Sony CMT-S20B User manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Sony CMT-S20B