Sony LBT-LV60 Bedienungsanleitung PDF herunterladen (Seite 54)

Troubleshooting

If you run into any problem using this stereo

system, use the following checklist.

First, check that the power cord is connected

firmly and that the speakers are connected

correctly and firmly.

Should any problem persist, consult your

nearest Sony dealer.

General

The display starts flashing as soon as you

plug in the power cord even though you

haven’t turned on the system

(demonstration mode).

•Press DEMO (STAND BY) while the

system is off.

The demonstration appears automatically

the first time you plug in the power cord,

or if there is a power outage lasting

longer than half a day.

The clock setting/radio presetting is

canceled.

•The power cord is disconnected or a

power failure occurs for more than half a

day.

Redo the following procedures:

–“Step 2: Setting the time” on page 7.

–“Step 3: Presetting radio stations” on

page 8.

To set the timer function again, also redo

“Waking up to music” on page 47 and

“Timer-recording radio programs” on

page 48.

There is no sound.

•Turn VOLUME clockwise.

•The headphones are connected.

•Insert only the stripped portion of the

speaker cord into the SPEAKER jack.

Inserting the vinyl portion of the speaker

cord will interfere with the speaker

connection.

•The volume level is automatically set to

the minimum during the Timer-

recording.

There is no microphone sound.

•Turn VOLUME or MIC LEVEL to adjust

the microphone volume.

•Make sure the microphone is connected

to the MIC 1 or MIC 2 jack correctly.

Before placing a cassette in the

tape deck

Take up any slack in the tape. Otherwise the tape

may get entangled inside the tape deck and become

damaged.

When using a tape longer than 90

minutes

The tape is very elastic. Do not frequently change

the tape operations such as play, stop, and fast-

forwarding, etc. The tape may get entangled in the

tape deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

When the tape heads become dirty

— the sound is distorted

— there is a decrease in sound level

— the sound drops out

— the tape does not erase completely

— the tape does not record

Make sure to clean the tape heads before you start

an important recording or after playing an old tape.

Use a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that

have contact with the tape every 20 to 30 hours of

use with a separately sold demagnetizing cassette.

For details, refer to the instructions of the

demagnetizing cassette.

In case color irregularity is

observed on nearby a TV screen

With the magnetically shielded type of speaker

system, the speakers can be installed near a TV set.

However, color irregularity may still be observed on

the TV screen depending on the type of your TV set.

If color irregularity observed...

Turn off the TV set once, then turn it on after 15 to

30 minutes.

If color irregularity is observed

again...

Place the speakers farther away from the TV set.

Precautions (continued)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony LBT-LV60 Bedienungsanleitung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Sony LBT-LV60