Sony PCG-717 Bedienungsanleitung PDF herunterladen (Seite 99)

Using Messages

To receive data files

When the Communication Center is on, it receives data files

automatically. New data messages are stored in the New folder of fhe

default mailbox. Data messages you have \ iewed or saveef are moved to

the Old folder.

To force the Communication Center to answer in data mode, select the

Answ'er as data only option in the Answering tab of the Options menu.

Note that with this setting, the Communication Center does not receive

voice messages or faxes. To enable voice and fax reception again, change

this setting back Complete Answering Machine.

If someone wants to send a data file to the Communication Center from a terminal

program, they must add ”09" to the end of the number they dial. The "09" tells the

Communication Center to switch into data mode. If the Communication Center is not

answering data calls correctly, the sending party should try adjusting the number of

commas before the "09" so that the "09" will be transmitted while the Communication

Center is playing the greeting. Each comma normally produces a two-second pause in

terminal programs. If the sender is also running the Communication Center program, it is

not necessary to add "09“ because the Communication Center sends "09" automatically.

However, the sender may want to change the Delay After Dialing setting in Options/Data to

adjust the length of the pause before the "09" is transmitted.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 153 154

Keine Kommentare

Sony PCG-717 Bedienungsanleitung Seite 99