Sony CMT-SX7 Bedienungsanleitung PDF herunterladen (Seite 23)

23

GB

Listening to music through a BLUETOOTH connection

depending on the connected BLUETOOTH

device.

 Once a pairing operation is performed, it does

not have to be performed again. In the following

cases, however, a pairing operation must be

performed again:

 Pairing information was erased when the

BLUETOOTH device was repaired.

 You attempt to pair the system with more

than 9 BLUETOOTH devices.

This system can pair with up to 9 BLUETOOTH

devices. If you pair another BLUETOOTH

device after pairing with 9 devices was

performed, pairing information of the device

that was connected with the system first is

overwritten with that of the new device.

 Pairing registration information of this system

is erased from the connected device.

 If you initialize the system or erase the

pairing history with the system, all the

pairing information will be erased.

 The sound of this system cannot be sent to a

BLUETOOTH speaker.

 “Passkey” may be called “Passcode,” “PIN code,”

“PIN number” or “Password,” etc.

To check the address of a

connected BLUETOOTH device

Press DISPLAY while the name set on the

connected BLUETOOTH device is shown in

the display window. The BLUETOOTH device

address appears in the display window for

about 8 seconds.

To cancel the connection with the

BLUETOOTH device

Disconnect the BLUETOOTH connection on

the BLUETOOTH device. “BLUETOOTH”

appears in the display window.

Depending on the device, the connection

may be canceled automatically when you

stop playback.

To erase the pairing registration

information

1

Select “Delete Link” after step 3 on

“Pairing the system with a BLUETOOTH

device and listening to music” (page 22),

then press ENTER.

2

Press / to select “Ok,” then press

ENTER.

“Complete!” appears in the display window and

all the pairing information is erased.

Note

 If you have erased the pairing information, you

cannot make a BLUETOOTH connection unless

pairing is performed again.

After step 1 on “Pairing the system with a

BLUETOOTH device and listening to music,”

operate the BLUETOOTH device to connect

with the system, then start playback and

adjust the volume on the BLUETOOTH

device.

Tip

 Stop playback on the BLUETOOTH device before

connecting the system to the BLUETOOTH

device.

Listening to music through

a registered device

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare