Sony CMT-SX7 Bedienungsanleitung PDF herunterladen (Seite 38)

38

GB

 Move the remote closer to the system.

 Replace the new batteries.

“Locked” appears in the display window and

the disc cannot be removed from the disc

tray.



Consult your nearest Sony dealer or local

authorized Sony service facility.

The disc or file will not play.



The disc has not been finalized (a CD-R or CD-

RW disc to which data can be added).

The sound skips, or the disc will not play.



The disc may be dirty or scratched. When the

disc is dirty, wipe it clean.

 Move the system to a location away from

vibration (for example, on top of a stable

stand).

 Oscillation of the speakers may be the cause

of sound skips, depending on the volume

level. Move the speakers away from the unit

or change the location of the speakers.

 A DTS disc is played. Do not play the DTS disc.

Play does not start from the first track or file.



Make sure the current play mode is correct. If

the play mode is “Shuffle” or “Program,”

change the setting (page 13).

Starting playback takes more time than usual.

 The following discs can increase the time it

takes to start playback:

 a disc recorded with a complicated tree

structure

 a disc recorded in multi-session format

 a disc that has many folders

Unable to pair the unit with a BLUETOOTH

device/BLUETOOTH connection between

the system and smartphone/iPhone is not

possible using SongPal.



Bring the unit and the BLUETOOTH device to

within 1 m (3 ft) of each other.

 If you initialize the system, the system may

not be able to connect your iPhone/iPad/iPod

or computer. In this case, erase the pairing

information on the iPhone/iPad/iPod or

computer, and then perform the pairing

procedure again.

Unable to connect the system to a

BLUETOOTH device with one-touch

connection (NFC).



Keep the smartphone/tablet close to the unit

until the smartphone/tablet responds. If the

system fails to connect, move the

smartphone/tablet slowly on the N-Mark of

the unit. When the smartphone/tablet

responds, follow the on-screen instructions to

establish the connection.

 Check that the NFC function of the

smartphone/tablet is set to on.

 If the smartphone/tablet is in a case, remove

it.

 NFC reception sensitivity varies, depending on

the device. If you repeatedly fail to connect

the unit with a smartphone/tablet by one

touch, make the connection by on-screen

operation.

 Check that your smartphone/tablet is

compatible with NFC. Check the websites

below for details on the latest supported

versions of the compatible devices:

For customers in Europe:

http://www.sony.eu/support

For customers in other countries/regions:

http://www.sony-asia.com/support

There is no sound.



Check that the system has established

BLUETOOTH connection with the BLUETOOTH

device.

 Pair the system and the BLUETOOTH device

again.

Distorted sound/humming or noise in the

speaker output.



Bring the unit and the BLUETOOTH device

closer together. Remove any obstacles

between the unit and the BLUETOOTH device.

 Set “Bluetooth Codec” to “SBC” (page 25).

For details on compatible iPhone/iPad/iPod,

see “Compatible devices and versions”

(page 45).

CD-DA/MP3 disc

BLUETOOTH

iPhone/iPad/iPod (when

connected to USB port)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare