Sony STR-DA5700ES Bedienungsanleitung PDF herunterladen (Seite 105)

105

Adjusting Settings

x TV+AMP

The sound is output from the TV speaker and

the speakers connected to the receiver.

Notes

• The sound quality of the playback equipment

depends on the TV’s sound quality, such as the

number of channels, and the sampling frequency,

etc. If the TV has stereo speakers, the sound output

from the receiver is also in stereo as that of the TV,

even if you play multi-channel source.

• When you connect the receiver to a video

equipment (projector, etc.), sound may not be

output from the receiver. In this case, select

“AMP.”

• When you do not select an HDMI input jack as an

audio input in “Audio Input Assign” in the Input

Settings menu, sound is not output from the TV.

x AMP

The HDMI audio signals from the playback

equipment is only output to speakers

connected to the receiver. The multi-channel

sound can be played back as it is.

Note

When “Control for HDMI” is set to “On,” “Audio

Out” may be changed automatically.

Lets you turn the H.A.T.S. (High quality

digital Audio Transmission System) function

on or off. When the H.A.T.S. function is turned

on, the sound quality is enhanced because

there is no jitter (timing gaps when reading

signals) when transmitting digital audio

signals.

x Off

x On

Notes

• It takes some time to output the sound after a

playback operation is performed on the connected

equipment (e.g., pressing the PLAY button,

pressing the STOP button, pressing the PAUSE

button) due to limitations of the H.A.T.S. system.

The time lag depends on the sound source.

• The H.A.T.S. function of this receiver works when

a Sony SCD-XA5400ES is connected to the

receiver.

• While the H.A.T.S. function is working, sound is

not output from the front high speakers.

Stream information about the

H.A.T.S. function available

Lets you turn the function which controls

equipment connected to the HDMI jack using

an HDMI cable on or off.

x Off

x On

Lets you output HDMI signals to the TV even

when the receiver is in standby mode. For

details, see “Outputting the HDMI signals

even when the receiver is in standby mode

(Pass Through)” (page 79).

x Off

x On

H.A.T.S.

Audio signal input Sampling frequency

Linear PCM 2ch 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz,

176.4kHz, 192kHz

Linear PCM Multi 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz,

176.4kHz, 192kHz

DSD 2.8224 MHz

Control for HDMI

Pass Through

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony STR-DA5700ES Bedienungsanleitung Seite 105

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Sony STR-DA5700ES