Sony STR-DN840 Bedienungsanleitung PDF herunterladen (Seite 111)

111

US

Additional Information

The server (such as a computer) does

not appear in the server list. (“No

Server” appears on the TV screen.)

• You may have turned on this receiver

before you turned on the server.

Refresh the server list (page 59).

• Make sure that the wireless LAN

router/access point is turned on.

• Make sure that the server is turned on.

• Confirm that the server has been set

correctly (page 54). Confirm that the

receiver has been registered to the

server and allows the music streaming

from the server.

• Confirm that the receiver and the

server are connected to the wireless

LAN router/access point correctly.

Check the network setting information

(page 92).

• Refer to the operating instructions of

your wireless LAN router/access

point, and check the multicast setting.

If the multicast setting is enabled on

the wireless LAN router/access point,

disable it.

Cannot play audio data normally.

• Shuffle Play is selected. Press

SHUFFLE repeatedly until “SHUF”

disappears.

Play does not start, or does not

automatically change to the next track

or file.

• Make sure that the audio file you are

trying to play is in a format supported

by this receiver (page 60).

• WMA files with DRM copyright

protection cannot be played back.

For how to check the copyright

protection of a WMA file, see page 62.

The sound skips during playback.

• The bandwidth of your wireless LAN

may be too low. Move the receiver and

the wireless LAN router/access point

closer to each other, without any

obstacles in between them.

• When using your computer as a server,

the computer may be running many

applications. If anti-virus software is

active on the computer, temporarily

disable the software as it needs large

amount of system resources.

• Depending on the network

environment, it may not be possible to

play tracks with more than one device

operating at the same time. Turn off

another device to enable the receiver to

play tracks.

“Cannot Play” appears.

• You cannot play any files other than

audio files.

• Confirm that the server has been set

correctly (page 54). Confirm that the

receiver has been registered to the

server and allows the music streaming

from the server.

• Check to confirm whether the audio

file on the server has been damaged or

erased. Refer to the operating

instructions supplied with the server.

• You cannot play the following tracks:

– A track that violates playback

restrictions.

– A track with irregular copyright

information.

– A track that you purchased at an

online music store that does not

allow home network streaming.

– A track in a format unsupported by

the receiver (page 60).

• Confirm that the selected track has not

been erased from the server. If the

track has been erased, select another

track.

• Make sure that the wireless LAN

router/access point is turned on.

• Make sure that the server is turned on.

• The server may be unstable. Restart it.

• Confirm that the receiver and the

server are connected to the wireless

LAN router/access point correctly.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare