Sony STR-DN840 Bedienungsanleitung PDF herunterladen (Seite 91)

91

US

Adjusting Settings

• Off: The dynamic range is not

compressed.

HDMI Settings menu

You can adjust the required settings for

equipment connected to the HDMI jack.

x Control for HDMI

Lets you turn the Control for HDMI

function on or off. For details, see

“Preparing for the “BRAVIA” Sync”

(page 77).

•On

•Off

• When you set “Control for HDMI” to “On”,

“HDMI Audio Out” may be changed

automatically.

• When the receiver is in standby mode, the ?/1

(on/standby) indicator on the front panel lights

up in amber if “Control for HDMI” is set to

“On”.

x Pass Through

Lets you output the HDMI signals to the

TV even when the receiver is in standby

mode.

• On: When the receiver is in the standby

mode, the receiver continuously outputs

HDMI signals from the receiver’s HDMI

TV OUT jack.

• Auto: When the TV is turned on while

the receiver is in the standby mode, the

receiver outputs HDMI signals from the

receiver’s HDMI TV OUT jack. Sony

recommends this setting if you use a

“BRAVIA” Sync compatible Sony TV.

This setting saves power in the standby

mode when compared with the “On”

setting.

• Off: The receiver does not output HDMI

signals when in standby mode. Turn on

the receiver to enjoy the connected

equipment’s source on the TV. This

setting saves power in the standby mode

when compared with the “On” setting.

When “Auto” is selected, it may take a little more

time for the image and sound to be output to the

TV than when “On” is selected.

x HDMI Audio Out

Lets you set the HDMI audio signals output

from the playback equipment connected to

the receiver via an HDMI connection.

• AMP: The HDMI audio signals from the

playback equipment are only output to

the speakers connected to the receiver.

Multi channel sound can be played back

as it is.

Audio signals are not output from the TV’s

speaker when “HDMI Audio Out” is set to

“AMP” .

• TV+AMP: The sound is output from

TV’s speaker and the speakers connected

to the receiver.

• The sound quality of the playback equipment

depends on the TV’s sound quality, such as

the number of channels, and the sampling

frequency, etc. If the TV has stereo speakers,

the sound output from the receiver is also in

stereo as that of the TV, even if you play back

multi channel source.

• When you connect the receiver to a video

equipment (projector, etc.), sound may not be

output from the receiver. In this case, select

“AMP”.

Notes

Note

Note

Notes

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare