Sony MZ-N910 Bedienungsanleitung PDF herunterladen (Seite 84)

The recorder does

not work or works

poorly.

• The disc is damaged or does not contain proper recording or

editing data.

, Reinsert the disc. Rerecord the disc. If the error message still

appears, replace it with another disc.

• There is an internal malfunction in the system.

, Remove the dedicated USB cable from the recorder, restart

your computer, and then connect the cable to the recorder

again.

• While operating, the recorder received a mechanical shock, too

much static, abnormal power voltage caused by lightning, etc.

, Restart the operation as follows.

1 Disconnect all the power sources.

2 Leave the recorder for about 30 seconds.

3 Connect the power source.

The clock does not

work correctly, the

clock does not

appear, or time and

date stamping did

not occur when

recording.

• The recorder was disconnected from the power source for 3

minutes or more, causing the clock to return to its factory setting.

, Charge the rechargeable battery, and then set the clock again.

• The clock is not set.

, Set the clock (page 58).

• Time and date will not be stamped on tracks which are checked out

from a computer.

During playback,

the display on the

remote control

does not turn on.

• Power save mode is activated.

, In power save mode, the display on the remote control turns on

whenever the remote control is operated, but not when the

controls on the recorder are operated. (The exception is when

the GROUP button on the recorder is pressed.)

The display

window is not

normal.

• The recorder was disconnected from the power source.

, Let the recorder sit for a while, or disconnect the power source,

reconnect it, and then press any of the operation buttons.

When using with

the AC power

adaptor, the display

window of the

recorder will

remain faintly lit

for some time even

after the recorder is

stopped.

• This is due to the MiniDisc system limitation. The recorder turns

off 3 minutes after the recorder has stopped in order to allow the

charging time on the dedicated USB cradle to be calculated.

The playing time of

a checked-out track

is different from

the time that

appears on your

computer monitor.

This is due to a calculation discrepancy between the recorder and

the computer.

Symptom Cause/Remedy

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 127 128

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony MZ-N910 Bedienungsanleitung Seite 84

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Minidisc-Spieler Sony MZ-N910