Sony HMD-A100 Bedienungsanleitung PDF herunterladen (Seite 7)

Sony HMD-A100/A200 (US,FR,ES) 3-867-863-11 (1)

If no picture appears on your screen

• Check that the monitor is correctly connected to the computer.

• If NO INPUT SIGNAL appears on the screen, confirm that

your computer’s graphic board is completely seated in the

correct bus slot.

• If you are replacing an old monitor with this model and OUT

OF SCAN RANGE appears on the screen, reconnect the old

monitor. Then adjust the computer’s graphic board so that the

horizontal frequency is between 30 – 70 kHz, and the vertical

frequency is between 48 – 120 Hz.

For more information about the on-screen messages, see “Trouble

symptoms and remedies” on page 14.

For customers using Windows 95/98

To maximize the potential of your monitor, install the new model

information file from the supplied Windows Monitor Information Disk

onto your PC.

This monitor complies with the “VESA DDC” Plug & Play standard. If

your PC/graphics board complies with DDC, select “Plug & Play Monitor

(VESA DDC)” or this monitor’s model name as the monitor type in the

“Control Panel” of Windows 95/98. If your PC/graphics board has

difficulty communicating with this monitor, load the Windows Monitor

Information Disk and select this monitor’s model name as the monitor

type.

For customers using Windows NT4.0

Monitor setup in Windows NT4.0 is different from Windows 95/98 and

does not involve the selection of monitor type. Refer to the Windows

NT4.0 instruction manual for further details on adjusting the resolution,

refresh rate, and number of colors.

Adjusting the monitor’s resolution and color number

Adjust the monitor’s resolution and color number by referring to your

computer’s instruction manual. The color number may vary according to

your computer or video board. The color palette setting and the actual

number of colors are as follows:

• High Color (16 bit)

65,536 colors

• True Color (24 bit)

about 16.77 million colors

In true color mode (24 bit), speed may be slower.

Connecting Universal Serial Bus

(USB) compliant peripherals

Your monitor has one upstream USB connector (on the rear

panel) and four downstream USB connectors (two on both the left

and right sides). They provide a fast and easy way to connect USB

compliant peripheral devices (such as keyboards, mice, printers

and scanners) to your computer using a standardized USB cable.

To use your monitor as a hub for your peripheral devices, connect

the USBs as illustrated below.

Turn on the monitor and computer.

Connect your computer to the square upstream

connector using the supplied USB cable.

For customers using Windows

If a message appears on your screen, follow the on-screen instructions

and select Generic USB Hub as the default setting.

Connect your USB compliant peripheral devices to

the rectangular downstream USB connectors.

Notes

• Not all computers and /or operating systems support USB

configurations. Check your computer’s instruction manual to see if you

can connect USB devices.

• In most cases, USB driver software needs to be installed on the host

computer. Refer to the peripheral device’s instruction manual for

further details.

• The monitor functions as a USB hub as long as the monitor is either

“on” or in power saving mode.

• If you connect a keyboard or mouse to the USB connectors and then

boot your computer for the first time, the peripheral devices may not

function. First connect the keyboard and mouse directly to the

computer and set up the USB compliant devices. Then connect them to

this monitor.

• Do not lean on the monitor when plugging in the USB cables. The

monitor may suddenly shift and cause injury.

AC IN

to USB compliant

peripheral devices

to a USB compliant

computer

to USB compliant

peripheral devices

01US01COV-UC.book Page 7 Monday, June 14, 1999 2:40 PM

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony HMD-A100 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Monitore Sony HMD-A100