Sony HT-NT3 Bedienungsanleitung PDF herunterladen (Seite 38)

HT-NT3

4-559-516-15(1)

D:\NORM'S JOB\SONY HA\SO150038\HT-NT3 (PMRF 06)\4559516151_GB

(CEK)\070ADD.fm

masterpage: Left

1 Prepare screws (not supplied) that

are suitable for the holes on the

rear of the Bar Speaker.

2 Fasten the screws to two studs in

the wall.

The screws should protrude by

8 mm to 9 mm.

3 Hang the Bar Speaker on the

screws.

Align the holes at the rear of the Bar

Speaker with the screws, then hang

the Bar Speaker on the two screws.

Precautions

On safety

 Should any solid object or liquid fall

into the cabinet, unplug the system

and have it checked by qualified

personnel before operating it any

further.

 Do not touch the AC power cord

(mains lead) with wet hands. Doing so

may cause an electric shock.

 Do not climb on the Bar Speaker and

subwoofer, as you may fall down and

injure yourself, or system damage may

result.

On power sources

 Before operating the system, check

that the operating voltage is identical

to your local power supply. The

operating voltage is indicated on the

nameplate at the rear of the Bar

Speaker and subwoofer.

 If you are not going to use the system

for a long time, be sure to disconnect

the system from the wall outlet. To

disconnect the AC power cord (mains

lead), grasp the plug itself; never pull

the cord.

 AC power cord (mains lead) must be

changed only at a qualified service

shop.

On heat buildup

Although the system heats up during

operation, this is not a malfunction. If

you continuously use this system at a

large volume, the cabinet temperature

of the top, side and bottom rises

considerably. To avoid burning yourself,

do not touch the cabinet.

5.2 mm

10 mm

More than 30 mm

4 mm

8 mm to

9 mm

726 mm

Additional Information

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony HT-NT3 Bedienungsanleitung Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Sony HT-NT3