Sony IPT-DS2 Betriebsanleitung PDF herunterladen (Seite 25)

7-GB

Preparing the unit

Inserting batteries

You can use the following batteries.

Two LR6 (size AA) alkaline batteries ˎ

Two AA Nickel-Metal Hydride batteries ˎ

1 Turn this unit off by sliding the ON/OFF

(power) switch to OFF.

2 Open the battery cover.

Note ¦

Be careful not to pull or exert a force on the foot of ˎ

this unit when opening the battery cover. Doing so

can cause a malfunction.

3 Insert the batteries into the battery

compartment according to the marks

inside the compartment.

4 Close the battery cover.

Notes ¦

The batteries inserted in this unit only power this ˎ

unit. They cannot power or charge the camera.

Be careful not to touch the multi connector when ˎ

holding this unit.

You cannot use manganese batteries. ˎ

Always use the same kind of batteries together. ˎ

Check the polarities of the batteries when inserting ˎ

them into this unit. If you insert the batteries in the

wrong direction, this unit does not work.

Do not use a new or charged battery together with ˎ

a dead battery.

To remove batteries

Turn this unit off and then remove the batteries.

Note ¦

When removing the batteries, be careful they do ˎ

not fall and cause injury.

Tip ¼

Remove the batteries if this unit will not be used ˎ

for a long period of time.

Battery level

If the battery level is low, the operation/battery

indicator flashes slowly. If the battery level gets

lower, indicator flashes more rapidly and this unit

automatically enters standby mode.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 214 215

Keine Kommentare

Sony IPT-DS2 Betriebsanleitung Seite 25