Sony IPT-DS2 Betriebsanleitung PDF herunterladen (Seite 31)

13-GB

Attaching the dedicated

stand

1 Insert the legs of the dedicated stand

firmly into the mount.

2 To set this unit on the dedicated stand,

align the projections on the mount of

the dedicated stand with the tripod

receptacle of this unit.

Notes ¦

Attach the camera to this unit before setting the ˎ

unit on the dedicated stand.

Use the dedicated stand in a level place. ˎ

Do not apply a strong force to the dedicated stand. ˎ

Pressing the button too strongly may cause this ˎ

unit to fall off the dedicated stand.

Hold the camera when operating it to prevent it ˎ

from falling and causing injury.

Keep this unit away from people’s faces, especially ˎ

children’s faces¸ to prevent injury in case it falls.

To use a commercially available tripod

You can use a commercially available tripod instead

of the dedicated stand. However, some tripods

cannot be used depending on the shape of the

camera platform.

Notes ¦

Do not use force to tighten the tripod screw. ˎ

When this unit is attached to a tripod, do not lift ˎ

the unit or swing the tripod around.

Be careful not to pull or exert a force on the foot of ˎ

this unit. Doing so can cause a malfunction.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 214 215

Keine Kommentare

Sony IPT-DS2 Betriebsanleitung Seite 31