Sony HDR-AX2000E Bedienungsanleitung PDF herunterladen (Seite 98)

• Do not let your camcorder get wet, for example,

from rain or sea water. If your camcorder gets

wet, it may malfunction. Sometimes this

malfunction cannot be repaired.

• If any solid object or liquid gets inside the

casing, unplug your camcorder and have it

checked by a Sony dealer before operating it

any further.

• Avoid rough handling, disassembling,

modifying, physical shock, or impact such as

hammering, dropping or stepping on the

product. Be particularly careful of the lens.

• Do not use a deformed or damaged battery pack.

• Keep the POWER switch setting to OFF when

you are not using your camcorder.

• Do not wrap your camcorder with a towel, for

example, and operate it. Doing so might cause

heat to build up inside.

• When disconnecting the power cord (mains

lead), pull it by the plug and not the lead.

• Do not damage the power cord (mains lead)

such as by placing anything heavy on it.

• Keep metal contacts clean.

• Keep the Wireless Remote Commander and

button-type battery out of children’s reach. If

the battery is accidentally swallowed, consult a

doctor immediately.

• If the battery electrolytic liquid has leaked,

– consult your local authorized Sony service

facility.

– wash off any liquid that may have contacted

your skin.

– if any liquid gets in your eyes, wash with

plenty of water and consult a doctor.

x When not using your camcorder for a

long time

• Turn on the camcorder and record and play back

images about once a month to keep it in an

optimum state for a long time.

• Use up the battery pack completely before

storing it.

Moisture condensation

If your camcorder is brought directly from a

cold place to a warm place, moisture may

condense inside your camcorder and cause

a malfunction of your camcorder.

x If moisture condensation has occurred

Leave your camcorder for about 1 hour without

turning it on.

x Note on moisture condensation

Moisture may condense when you bring your

camcorder from a cold place into a warm place (or

vice versa) or when you use your camcorder in a

humid place as shown below.

• When you bring your camcorder from a ski

slope into a place warmed up by a heating

device.

• When you bring your camcorder from an air

conditioned car or room into a hot place outside.

• When you use your camcorder after a squall or a

shower.

• When you use your camcorder in a hot and

humid place.

x How to avoid moisture condensation

When you bring your camcorder from a cold place

into a warm place, put your camcorder in a plastic

bag and seal it tightly. Remove the bag when the

air temperature inside the plastic bag has reached

the ambient temperature (after about 1 hour).

LCD screen

• Do not exert excessive pressure on the LCD

screen, as it may cause damage.

• If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

• While using your camcorder, the back of the

LCD screen may heat up. This is not a

malfunction.

x To clean the LCD screen

If fingerprints or dust make the LCD screen dirty,

it is recommended you use a soft cloth to clean it.

Maintenance and precautions (Continued)

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony HDR-AX2000E Bedienungsanleitung Seite 98

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamerarekorder Sony HDR-AX2000E