Sony DVP-NS708H Bedienungsanleitung PDF herunterladen (Seite 60)

60

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound

according to the playback and connection

conditions.

Select “AUDIO SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 55).

The default settings are underlined.

◆ AUDIO DRC (Dynamic Range Control)

(DVDs only)

Makes the sound clear when the volume is

turned down when playing a DVD that

conforms to “AUDIO DRC.”

This function affects the output from the

following jacks:

– LINE OUT L/R (AUDIO) jacks

– LINE (RGB)-TV jack

– DIGITAL OUT (COAXIAL)/HDMI OUT

jack only when “DOLBY DIGITAL” is set

to “D-PCM” (page 61).

◆ DOWNMIX (DVDs only)

Switches the method for mixing down to 2

channels when you play a DVD which has

rear sound elements (channels) or is recorded

in Dolby Digital format. For details on the

rear signal components, see “Checking the

audio signal format” (page 44). This function

affects the output of the following jacks:

– LINE OUT L/R (AUDIO) jacks

– LINE (RGB)-TV jack

– DIGITAL OUT (COAXIAL)/HDMI OUT

jack when “DOLBY DIGITAL” is set to

“D-PCM” (page 61).

◆ DIGITAL OUT

Selects if audio signals are output via the

DIGITAL OUT (COAXIAL)/HDMI OUT

jack.

Setting the digital output signal

Switches the method of outputting audio

signals when you connect a component such

as an audio component or MD deck with a

digital input jack.

For connection details, see page 18.

Select “DOLBY DIGITAL,” “MPEG,”

“DTS,” and “48kHz/96kHz PCM” after

setting “DIGITAL OUT” to “ON.”

If you connect a component that is

incompatible with the selected audio signal, a

loud noise (or no sound) may be heard from

the speakers, risking damage to your ears or

speakers.

Notes

• The AV SYNC function (page 35) is not effective

if you use the DIGITAL OUT (COAXIAL) jack,

and set “DOLBY DIGITAL,” “MPEG” or “DTS”

to “DOLBY DIGITAL,” “MPEG” or “ON”

respectively.

• The AV SYNC function (page 35) is not effective

if you connect a Dolby Digital or DTS-compliant

device via the HDMI OUT jack, and set “DOLBY

DIGITAL,” “MPEG” or “DTS” to “DOLBY

DIGITAL,” “MPEG” or “ON” respectively.

STANDARD Normally, select this position.

TV MODE Makes low sounds clear even if

you turn the volume down.

WIDE

RANGE

Gives you the feeling of being

at a live performance.

AUDIO SETUP

AUDIO DRC:

DIGITAL OUT:

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

DOLBY DIGITAL:

MPEG:

D-PCM

PCM

DTS:

OFF

48kHz/96kHz PCM:

48kHz/16bit

DOLBY

SUR-

ROUND

Normally, select this position.

Multi-channel audio signals are

output to 2 channels for enjoying

surround sounds.

NORMAL Multi-channel audio signals are

downmixed to 2 channels for use

with your stereo.

ON

Normally, select this position. When

you select “ON,” see “Setting the

digital output signal” for further

settings.

OFF The influence of the digital circuit

upon the analogue circuit is minimal.

If you are using the HDMI OUT jack,

PCM sound will be output depending

on the connected equipment. If the

signal is encrypted for copyright

protection purposes, the signal is only

output as 48 kHz/16 bit PCM.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare