Sony RDR-GX300 Bedienungsanleitung PDF herunterladen (Seite 41)

Recording

One Touch Timer

If you use the SMARTLINK connection, you can

easily display the timer programming menu.

When the TV is turned on or in standby mode,

insert a disc and press [TIMER]. The recorder

automatically turns on and the TV’s input is

switched to the recorder. The Timer programming

menu appears.

z Hint

You can play the recorded programme by selecting the

programme title in the Title List menu.

Notes

• If “The disc is full or nearly full” appears on the screen,

change the disc, or make available space for the

recording (DVD+RW/DVD-RW only) (page 62).

• Check that the clock is correctly set before setting the

timer recording. If not, the timer recording cannot be

made.

To record a satellite programme, turn on the satellite

tuner and select the satellite programme you want to

record. Leave the satellite tuner turned on until the

recorder finishes recording. If you connect equipment

with a timer function, you can use the Synchro Rec

function (page 47).

• Even if the timer is set for the same daily or weekly

programme, the timer recording cannot be made if it

overlaps with a programme that has priority. “ ” will

appear next to the overlapped setting in the Timer List.

Check the priority order of the settings (page 42).

• Even if the timer is set, timer recordings cannot be

made while recording a programme that has priority.

• The Rec Mode Adjust function only works with a timer

recording and the PDC/VPS function set to off. It does

not function with Quick Timer or Synchro Rec.

• You cannot extend the recording duration time when

“PDC/VPS” is set to “On.”

Recording TV programmes using the

G-Code system

The G-Code system is a feature that simplifies

setting the timer. Just enter the G-Code number

listed in the TV programme guide. The date, time,

and channel of that programme are set

automatically. Note that this function may not be

available in some areas.

Check that the channels are correctly set in

“Channel Setting” in Settings Setup (page 81).

1 Insert a recordable disc.

2 Press [TIMER].

• If the Timer programming (Standard) menu

appears, press < to switch the display to

“G-Code.”

1 2 3

4 5 6

7 8 9

</M/m/,,

ENTER

[TIMER]

Number

buttons, SET

x REC

STOP

CLEAR

Timer - G-Code

Set the timer by entering the timer code.

Standard

G-Code No.

Cancel

,continued

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony RDR-GX300 Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Sony RDR-GX300