Sony DTC-57ES Bedienungsanleitung PDF herunterladen (Seite 23)

Creating a Sound Muted Portion (Record Muting) End Search

1 During recording or record*pause mode, press the

OREC MUTE button where a sound muted portion is

required.

The IRECI indicator flashes and the record muting is

activated. After about 4 seconds, the IRECi indicator

shows a steady light, and the ii indicator lights. The deck

enters the record-pause mode.

2 To resume recording, press the iiPAUSE or ► (piay)

button.

Recording resumes.

Using sound muted portion

If you intend to dub the DAT cassette onto an analog

cassette tape, we recommend that you insert sound muted

portions between selections on the DAT cassette.

This will ensure that the AMS function of the analog

cassette deck works correctly for the recorded tape.

Note

With DAT deck, the AMS function is realized by using the

start ID code. (See page 26.)

Caution

To place a space on a DAT cassette, you must not advance

the tape with the ^ or ► button. If a space is created this

way, no absolute time code will be recorded on the

succeeding area, and you cannot check the elapsed time

of the tape.

To create a sound muted portion of more than 4 seconds

Keep the OREC MUTE button pressed for as long as you want to

make a recorded portion with no signals. After about 4 seconds,

the IRECI indicator flashes rapidly. When you release the OREC

MUTE button, the deck enters the record-pause mode.

The interval between selections is indicated in the MARGIN

display.

To create a sound muted portion of less than 4 seconds

Press the OREC MUTE button, and then the llPAUSE button while

the REC indicator is flashing.

To start recording In the rec mute mode

Press the *REC button while the PEC I indicator is flashing.

If the previous recording was applied to the middle of the

tape, you must locate exactly the last point of the recorded

area, and start the new recording from this point. This will

prevent leaving a blank section on the tape.

If you want space between the last recording and the new

recording, use the OREC MUTE button to mute the sound.

Press

Lights

LJm

48 kHz

AMS

The last point of the previous recording (the beginning of

the blank section or the beginning of the end ID*) is

located, and the tape stops. When the end ID is detected,

the "EE* indicator lights at the PGM. NO display.

Note

If the point where you pressed the ^ button is blank, the

end search operation will not function.

When the end ID is written before a blank section

* The end search operation stops at the beginning of this

end ID as illustrated below.

Selection

\ Selection Selection

Blank

-------

End ID

The position at which

the end ID stops.

Note on the duration of a blank section

The blank section must last for more than 9 seconds for the end

search operation to function correctly.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 48 49

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony DTC-57ES Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Diktiergeräte Sony DTC-57ES