Sony DTC-57ES Bedienungsanleitung PDF herunterladen (Seite 47)

Symptom Cause

Remedy

Search function does not

activate during piayback.

The start ID is not written correctly. Erase it (page 28), and then write it

again.

The portion between the end of a start ID

and the beginning of the following start

ID is less than 9 seconds (18 seconds in

the long-play mode) long.

When writing the start IDs manually, write

so that the intervals between them are

more than 9 seconds (18 seconds in the

long-play mode.)

The selected program number does not

exist on the tape.

Use the RENUMBER button to re-arrange

the program numbers, (page 30)

The program numbers are out of order.

Search function activates

suddenly during playback.

The skip play function is operating.

(The SKIP PLAY indicator lights in the

display window.)

Turn off the indicator by pressing SKIP

PLAY.

The repeat play function is operating. Turn off the indicator by pressing

REPEAT 1/ALL.

Search function stops.

There is a blank section between

selections. (The sampling frequency

indicator blinks on the display window.)

Use the end search function (page 23)

when recording so that no blank is

created.

The tape operation buttons do

not operate while writing the

start ID.

While writing the start ID (9 seconds or

18 seconds), none of the buttons except

the ■ and ^OPEN/CLOSE buttons

operate.

Operate after the start ID is written.

‘

The absolute time codes cannot

be written.

Recording was started from the blank

section.

Rewind the tape to the beginning, or

locate the very last point of the previous

recording, using the end search function

(page 23), and start recording from the

point.

End ID cannot be written during

playback.

The portion where you want to write the

end ID is blank.

Set the deck in the record-pause mode

by pressing REC, then write the end ID.

Renumbering function does not

operate.

The portion between the end of a start ID

and the beginning of the following start

ID is less than 9 seconds (18 seconds in

the long-play mode) long.

When writing the start IDs manually, write

so that the intervals between them are

more than 9 seconds (18 seconds in the

long-play mode).

Start ID cannot be erased.

Skip ID cannot be erased.

Two skip IDs are written continuously. When writing the skip IDs, write so that

the intervals between them are more than

1 second (2 seconds in the long-play

mode).

End ID cannot be erased.

The end ID is written at the beginning of

the tape.

Start recording from the beginning of the

tape.

The end ID is written immediately after a

start ID.

First erase the start ID.

1 2 ... 42 43 44 45 46 47 48 49

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony DTC-57ES Bedienungsanleitung Seite 47

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Diktiergeräte Sony DTC-57ES