Sony MEX-N4000BT Bedienungsanleitung PDF herunterladen (Seite 7)

7GB

3 Rotate the control dial to set the hour

and minute.

To move the digital indication, press SEEK +/–.

4 After setting the minute, press MENU.

The setup is complete and the clock starts.

To display the clock, press DSPL.

Preparing a BLUETOOTH Device

You can enjoy music, or perform handsfree calling,

by connecting a suitable BLUETOOTH device. For

details on connecting, refer to the operating

instructions supplied with the device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound may

result.

When connecting a BLUETOOTH device (cellular

phone, audio device, etc.) for the first time, mutual

registration (called “pairing”) is required. Pairing

enables this unit and other devices to recognize

each other.

1 Place the BLUETOOTH device within 1 m

(3 ft) of this unit.

2 Press CALL, rotate the control dial to

select [PAIRING], then press it.

flashes.

The unit enters pairing standby mode.

3 Perform pairing on the BLUETOOTH

device so it detects this unit.

4 Select [Sony Car Audio] shown in the

display of the BLUETOOTH device.

If [Sony Car Audio] does not appear, repeat from

step 2.

5 If passkey* input is required on the

BLUETOOTH device, input [0000].

* Passkey may be called “Passcode,” “PIN code,”

“PIN number” or “Password,” etc., depending on

the device.

When pairing is made, stays lit.

6 Select this unit on the BLUETOOTH device

to establish the BLUETOOTH connection.

or lights up when the connection is

made.

Note

While connecting to a BLUETOOTH device, this unit

cannot be detected from another device. To enable

detection, enter the pairing mode and search for this

unit from another device.

To cancel pairing

Perform step 2 to cancel the pairing mode after this

unit and the BLUETOOTH device are paired.

To use a paired device, connection with this unit is

required. Some paired devices will connect

automatically.

1 Press CALL, rotate the control dial to

select [BT SIGNL], then press it.

Make sure that lights up.

2 Activate the BLUETOOTH function on the

BLUETOOTH device.

3 Operate the BLUETOOTH device to

connect to this unit.

or lights up.

Icons in the display:

Pairing and connecting with a

BLUETOOTH device

Connecting with a paired BLUETOOTH

device

Lights up when a cellular phone is

connected to the unit.

Lights up when an audio device is

connected to the unit.

Indicates the signal strength status of

connected cellular phone.

[0000]

Input passkey

1 2 3 4 5 6 7 8 9 10 11 12 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

Sony MEX-N4000BT Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Sony MEX-N4000BT