Sony STR-DA5700ES Bedienungsanleitung PDF herunterladen (Seite 136)

136

GB

No sound is output, or sound is output

from the speakers on the computer

• Check that a playback device on your

computer is set to “AV RECEIVER,”

otherwise change the operating system

settings.

The following procedures are examples.

The actual procedure may be different,

depending on the environment in which

you are using the computer.

In Windows XP

1 Select “Start” t “Control Panel” to open

the Control Panel.

2 Select “Sounds, Speech, and Audio

Device” t “Change the Speaker

Settings.”

3 Select the “Audio” tab in the “Sounds and

Audio Devices Properties” dialog box.

4 Select “AV RECEIVER” from the

“Default device” pull-down menu in the

“Sound playback” section.

5 Click the “OK” button.

The default audio output device is set to

“STR-DA5700ES.”

In Windows Vista/7

1 Select “Start” t “Control Panel” to open

the Control Panel.

2 Select “Hardware and Sound” t.

“Sound.”

3 Select the “Playback” tab in the “Sound”

dialog box.

4 Select “AV RECEIVER,” then click “Set

Default” button.

5 Make sure that a green check mark

appears next to “AV RECEIVER.”

The default audio output device is set to

“STR-DA5700ES.”

In Mac OS X

1 Select the Apple menu t “System

Preferences” t “Sound” to open the

“Sound” panel.

2 Select the “Output” tab.

3 Select “AV RECEIVER” from the

“Choose a device for sound output” list.

The default audio output device is set to

“STR-DA5700ES.”

The USB device is not recognized.

• Turn off the receiver, then disconnect the

USB device. Turn on the receiver again

and reconnect the USB device.

• Connect the supported USB device

(page 54).

• The USB device does not work properly.

Refer to the USB device operating

instruction on how to deal with this

problem.

Content on the USB device is not

displayed.

• The hierarchy of folders has exceeded 4

levels. The receiver can display content in

only up to 4 levels (including the “ROOT”

folder). However, folders in a 4th level

folder are not displayed.

No sound is output.

• Turn off the receiver, then disconnect the

USB device. Turn on the receiver again

and reconnect the USB device.

• Connect the supported USB device

(page 54).

• Press N to start playback.

• When “2ch Analog Direct” is being used,

the sound is not output. Use other sound

field (page 64).

• The music data itself contains noise, or the

sound is distorted.

• Depending on the file format, there may be

files that sometimes cannot be played

back. For details, see “Playable types of

files” (page 144).

• USB device formatted with file systems

other than FAT12/16/32, VFAT, or NTFS

are unsupported.*

• If you use partitioned USB device, only

audio files on the first partition can be

played back.

PC (USB)

USB device

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare