Sony STR-DA5700ES Bedienungsanleitung PDF herunterladen (Seite 87)

87

GB

Using Other Features

You can record with an audio equipment using

the receiver. Refer to the operating instructions

supplied with your MD deck or tape deck.

1 Select “Listen” from the home

menu, then press .

2 Select the playback equipment,

then press .

3 Prepare the playback

equipment for playing.

For example, insert a CD into the CD

player.

4 Prepare the recording

equipment.

Insert a blank MD or tape into the

recording deck and adjust the recording

volume level.

5 Start recording on the

recording deck, then start the

playback equipment.

Switching the command

mode of the receiver and

the remote control

You can switch the command mode

(COMMAND MODE AV1 or COMMAND

MODE AV2) of the receiver and the remote

control.

Switch the command mode from the factory

default setting to the appropriate setting, if

other Sony equipment is operated accidentally

by the same remote control, when you are

operating the receiver using the remote control

supplied with the receiver.

The command modes of both the receiver and

the remote control are those of the factory

default setting (COMMAND MODE AV2).

The receiver and the remote control, on the

contrary, should use the same command mode.

If the command modes of the receiver and the

remote control are different, you cannot use

the remote control to operate the receiver.

1 Press ?/1 to turn off the

receiver.

2 While holding down 2CH/

A.DIRECT, press ?/1 to turn on

the receiver.

When the command mode is set to “AV2,”

“COMMAND MODE [AV2]” appears on

the display.

When the command mode is set to “AV1,”

“COMMAND MODE [AV1]” appears on

the display.

Recording with an audio

equipment

Switching the command mode of

the receiver

2CH/A.DIRECT?/1

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare