
23
4 Press M or m repeatedly to adjust the
volume.
5 Press (ENTER).
The display returns to the normal playback
mode.
Adjusting the volume of the
subwoofer(s) (monaural)
1 During playback or radio reception,
press (SOUND) repeatedly to select
“SUB.”
2 Press < or , repeatedly to adjust
the volume.
After 3 seconds, the display returns to the
normal playback mode.
Tip
The volume level is adjustable from –12 dB to +12 dB.
(Below –12 dB, “– ∞ dB” is displayed.)
Adjusting the cut-off frequency for the
subwoofer(s)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted high
and middle frequency signals entering the
subwoofer(s). By setting the cut-off frequency
(see the diagram below), the subwoofer(s) will
output only low frequency signals so you can get
a clearer sound image.
1 During playback or radio reception,
press (MEN U).
2 Press M or m repeatedly to select “Sub
LPF”, then press (ENTER).
3 Press < or , to select the cut-off
frequency.
Each time you press < or ,, the frequency
changes as follows:
62Hz y 78Hz y 99Hz y 125Hz y
157Hz y off (default setting)
4 Press M or m repeatedly to adjust the
volume.
5 Press (ENTER).
The display returns to the normal playback
mode.
Cut-off frequency
Frequency (Hz)
Level
off
Kommentare zu diesen Handbüchern